Various microfibrillar composites were prepared in situ using boron nitride as a thermally conductive filler. The multistage stretching extrusion process was used in an effort to improve thermal conductivity and mechanical properties. It was found that the addition of laminating-multiplying elements (LMEs) improved the dispersion of BN in the composite polymers and they also improved the tensile and impact strength of the polymers. It was also found that the thermal ...
The thermal conductivities of 6 rocks containing gypsum, as well as 6 rocks in which gypsum is absent were determined experimentally. The rock samples were taken from the Kuqa depression, in the north of the Tarim Basin, China. It was determined that gypsum-bearing rocks are thermal insulators, and this property when combined with other properties of gypsum-bearing rocks make them good cap rocks and also make them suitable for oil production and ...
Polystyrene/multi-walled carbon nanotube (PS/MWCNT) nanocomposite foams were prepared in order to determine if these foams exhibited a reduced thermal conductivity in comparison to pristine polystyrene foam. The thermal conductivity of foams can be broken down into three modes of conduction: gas conductivity, solid conductivity, and radiative conductivity. The PS/MWCNT foams had decreased gas and radiative conductivities in comparison to the pristine PS foam; however, the solid conductivity ...
In an effort to enhance heat transfer in the laminar flow regime of a heating duct, TiO2 and SiO2 nanoparticles were added to water to create nanofluids with a higher thermal conductivity than that of the water alone. Twist-tape was also used to enhance heat transfer within the duct. The thermal conductivities of the nanofluids were measured using the Transient Plane Source instrument. It was found that the use of ...
The potential for the use of silica aerogels doped with TiO2 nanowires as thermal insulators was evaluated. It was found that the TiO2-doped aerogels showed good thermal insulation properties and that other desirable properties were retained upon the addition of TiO2 nanowires....
