The thermal properties of a series of treated and untreated oil palm fiber-reinforced composites were tested at room temperature and atmospheric pressure using the TPS method. Treatment of the composites with varying methods resulted in increases in thermal conductivity, porosity and pore sizes depending on the treatment method used. The dependence of thermal conductivity on temperature was also studied and it was found that the maximum thermal conductivity was at ...
Through the use of thermal conductivity and moisture related measurements, this article investigates the physical properties of undergarments of different compositions (cotton, polyester, rayon, viscose, etc.). This research is used to determine which types of materials would best be suited for use in sports/day-to-day/comfortable clothes. Important properties measured include the porosity of the material as that affects the ability for moisture to be released, as well as the ...
Through the use of the transient plane source method the researchers were able to measure the thermal conductivity of a collection of cellular metals as well as the in- homogeneities of the samples. The volume of the samples was varied and the density of these individual volumes was calculated from tomography....
The authors look into problems with accurately measuring thermal conductivity of liquid samples. Among these problems is the onset of natural convection during the measurement of thermal properties, which may lead to skewed values reported after characterization. The effect of natural convection is analyzed numerically for the transient plane source method in order to determine at what time during an analysis the convection causes incorrect output data. The effect of ...
Yttria-stabilized zirconia (YSZ) was synthesized by the spark plasma sintering process to generate pore-free, homogenous bulk samples that were then tested for thermal conductivity, which was measured by two separate methods: TPS and LFT. The TPS method was found to be better for measuring of thermal conductivity in this specific case. Using the phonon-hopping model (PHM) the authors were able to determine how grain boundaries of the bulk samples affected ...
