Phase change materials (PCMs) can be used as heat sinks to manage high temperature fluctuations in electronics. In this paper, a heat sink was generated from a paraffin/expanded graphite composite PCM, and the thermal conductivities of the materials were measured using the transient plane source (TPS) method of the Thermal Analyzer. Results showed that the composite PCM had a significantly higher thermal conductivity than the pure paraffin....
In this paper, natural rubber (NR)/graphene (GE) composites were prepared using an ultrasonically-assisted latex mixing and in situ reduction (ULMR) process. A thermal constants analyzer measured the thermal conductivity of the NR/GE composites using the transient plane source (TPS) method. Results showed that GE had a good thermal conductivity, and can be used as a thermal conductivity enhancer in polymers....
The first soy and tannin based organic aerogels with 91% naturality have been developed by researchers, and they have low bulk density but high volumes of mesopores. In this experiment, the transient plane source (TPS) method was used to measure the thermal characteristics of the organic aerogels. Results showed that these novelty aerogels are ecologically friendly because they are low cost and renewable but have attractive thermal properties....
Carbon nanotubes (CNTs) combined with inorganic matrices are not structurally sound unlike singular CNTs which have good mechanical performances. Borosilicate glass, commercially known as Pyrex, is durable but has yet to be successfully fabricated using the sol-gel technique. In this paper, the sol-gel technique was used to manufacture borosilicate glass matrix composites with multi-walled carbon nanotubes (MWCNTs). The technique measured thermal conductivity of the materials using the transient plane source (...
Thermophysical and structural properties of sintered ore particles (SOPs) were determined to expand upon the little documented information there is regarding the properties of these materials. In addition to this, a fractal model was also developed for the prediction of thermal conductivity in SOPs as a function of porosity. The experimental results revealed that the specific heat capacity increased with increasing temperature and that the thermal conductivity decreased with increasing ...
