Epoxy nanocomposites containing thermally reduced graphene oxides (TRGs) with different oxygen contents were prepared and their mechanical and thermal properties were investigated. It was found that increasing the number of oxygen containing groups on the TRGs resulted in reduced agglomeration of the graphene oxides within the epoxy matrix. Therefore, in samples with a higher oxygen content, a higher interfacial contact area is present between the organic and inorganic phases in ...
Author(s): Chien-Hua Hsu, Jui-Ming Yeh, Kung-Chin Chang, Mei-Chun Lai, Min-Hsiang Hsu, Pei-Ju Liu, Tsao-Li Chuang, Wei-Ren Liu
Polytetramethylene ether glycol (PTMEG) was used to functionalize multi-walled carbon nanotube (MWNT) by grafting to produce MWNT-g-PTMEG. These functionalized nanotubes were then dispersed in thermoplastic polyurethane (TPU) to form a TPU/MWNT nanocomposite. It was found that the functionalization resulted in improved dispersion of the nanotubes in the TPU material. The tensile strength and elongation at break of the nanocomposite were also enhanced by the addition of the nanotubes in ...
Author(s): A. Khan, F. Piscitelli, H. Benkreira, H. S. Xia, M. Lavorgna, P. Coates, R. Patel, Y. H. Zhan
The thermal imidization method was used to prepare an electroactive polyimide/graphene nanocomposite (EPGN) material membrane. It was determined that the composites that were formed had improved mechanical strength, thermal stability, and thermal conductivity, as well as an improved dielectric constant and a decreased gas permeability in comparison to electroactive polyimide membranes....
Author(s): Chien-Hua Hsu, Hsin-I Lu, Jui-Ming Yeh, Kuan-Yeh Huang, Kung-Chin Chang, Mei-Chun Lai, Tsao-Li Chuang, Wei-Ren Liu, You-Rong Hsiao
Si-SiC composite foams were prepared using tannin-based foams as templates. The foams were prepared by four different methods for the determination of which method would best produce a foam with a pore size under 200 µm. The foam samples were characterized by SEM, XRD, and Raman spectroscopy, and the thermal conductivity of one of the foams was investigated by the transient plane source method. It was found that direct infiltration of ...
Author(s): A. Ortona, Alain Celzard, Antonio Pizzi, C. Zollfrank, G. Amaral-Labat, S. Pusterla, V. Fierro
Synthetic polymers in starch-based polymer formulations improve the thermal and mechanical properties of the compounds. The purpose of this study was to develop and analyze foams containing ethylene-vinyl acetate (EVA) and varying concentrations of corn starch. A Thermal Constants Analyser measured the thermal conductivity of the EVA/starch samples using the transient plane source (TPS) method. Results showed that the thermal conductivity of the blends increased with starch content. The ...
Author(s): C. J. L. Constantino, J. A. de Saja, M. A. Rodriguez-Perez, Miguel-Cngel RodrC-guez-PC)rez, R. D. Simoes
