Through the use of experimental (one-sided TPS technique) and theoretical (MD simulations) methods, the thermal conductivity and thermal diffusivity of methane hydrate was studied. Varying concentrations of methane hydrate were studied. The effect of pressure on the thermal properties of methane hydrate was also studied and didn't have a significant effect on the measurement of thermal conductivity. The results obtained from the experimental and theoretical methods agreed well with each ...
The thermal properties of a series of treated and untreated oil palm fiber-reinforced composites were tested at room temperature and atmospheric pressure using the TPS method. Treatment of the composites with varying methods resulted in increases in thermal conductivity, porosity and pore sizes depending on the treatment method used. The dependence of thermal conductivity on temperature was also studied and it was found that the maximum thermal conductivity was at ...
The authors look into problems with accurately measuring thermal conductivity of liquid samples. Among these problems is the onset of natural convection during the measurement of thermal properties, which may lead to skewed values reported after characterization. The effect of natural convection is analyzed numerically for the transient plane source method in order to determine at what time during an analysis the convection causes incorrect output data. The effect of ...
Yttria-stabilized zirconia (YSZ) was synthesized by the spark plasma sintering process to generate pore-free, homogenous bulk samples that were then tested for thermal conductivity, which was measured by two separate methods: TPS and LFT. The TPS method was found to be better for measuring of thermal conductivity in this specific case. Using the phonon-hopping model (PHM) the authors were able to determine how grain boundaries of the bulk samples affected ...
The authors obtained a collection of crosslinked closed cell polyethlyene foams from a commercial supplier and then characterized the thermal properties of these foams. The characterization involved the use of the TPS technique to measure thermal conductivity, thermal diffusivity and specific heat capacity. It was found that increasing density resulted in a decreased thermal diffusivity and an increased specific heat capacity per unit volume. A theoretical model was developed to ...
