Composite carbon foams were prepared by mixing tannin-based resin with various graphite powders in an effort to improve the thermal conductivity relative to pristine carbon foams in order to use them as hosts for phase-change materials. It was found that using graphite powder with smaller particle sizes resulted in foams with a higher bulk density than those prepared with an equal amount of larger graphite particles, this increased density resulted ...
This study analyses a mullite ceramic formed through foaming and starch consolidation of mullite powder, and how its thermal conductivity changes with porosity of the ceramic. The thermal conductivity was measured through the transient plane source (TPS) method with the TPS. As the porosity of the mullite ceramic increases so does the thermal conductivity....
The purpose of this study was to fabricate and analyze the physical properties of polyacrylate–gold nanocomposites (PGNs) with gold nanoparticles (GNPs) as their nucleation agents. The transient plane source (TPS) method was used to measure the thermal properties of the polyacrylate–gold nanocomposite foams (FPGNs) and PGNs. Results showed that the addition of GNPs improved thermal conductivity of the PGN materials, but as the size of GNPs increased, the ...
In this paper, cost efficient RVC foams were fabricated from household cleaning pad waste (CPW) and sucrose. A thermal analyzer measured the thermal conductivity of the RVC foams using the transient plane source (TPS) method. Results showed that the thermal conductivity of the CPW foams were significantly lower than Ultramet’s RVC foams which are highly insulative. This study proved that it is possible to reproduce low-cost carbon foams from ...
This paper examined the synthesis of hyperbranched polymers (HBPs) and how their hydroxyl end groups help form networks in tannin-based foams. A thermal analyzer (TPS) measured the thermal conductivity of the foam samples using the transient plane source (TPS) method. Results showed that modified foams retained their thermal insulation properties even with the addition of oligomeric precursors. This gives good indication that the addition of hydroxyl-terminated oligomeric precursors to tannin ...
