Products
- Products
  - Column 1
    - HFM-100Heat Flow Meter
    - TLS-100Transient Line Source
    - THW-L1Transient Hot Wire
    - THW-L2Transient Hot Wire
    - GHFM-02Guarded Heat Flow Meter
    - TPS-EFFTransient Plane Source
  - Column 2
    - Hot Disk TPS
  - Column 3
    - DSC-L600Differential Scanning Calorimeter
    - TGA-1000Thermogravimetric Analyzer
    - TGA-1500Thermogravimetric Analyzer
- Category
  - Thermophysical Analysis
    - Heat Flow Meter, HFM-100Integrated Temperature & Automation
    - Transient Hot Wire, THW-L1 & THW-L2Thermal Conductivity, Thermal Diffusivity & Specific Heat
    - Transient line Source, TLS-100Thermal Conductivity & Thermal Resistivity
  - Thermal Analysis
    - Differential Scanning Calorimeter, DSC-L600Heat Flow, TG, Specific Heat
    - Thermogravimetric Analyzer, TGA-1000 & TGA-1500Integrated Temperature & Automation
- Property
- Material Type
  - Solids
    - HFM-100Homogeneous & Heterogeneous Insulation
    - TLS-100Concrete, Rocks, Polymers
    - GHFM-02Homogeneous, Heterogeneous, Metals & Composites
  - Liquids
    - THW-L1Liquids, Temperature & Pressure
    - THW-L2Liquids, Temperature & Pressure
  - Pastes
    - TLS-100Paste up to 5 W/mK
    - THW-L1Paste up to 2 W/mK
    - THW-L2Paste up to 2 W/mK
    - GHFM-02Paste up to 15 W/mK
  - Powders
    - TLS-100Soil, Small to Medium Particle Size
- Material Characteristics
  - Isotropic / Homogeneous
    - HFM-100Insulation and Construction Materials
    - TLS-100Soil, rock & polymers
    - THW-L1All Liquids
    - THW-L2All Liquids
    - GHFM-02Composites & polymers
    - TPS-EFFTextiles, fabrics & solids
  - Heterogeneous
    - HFM-100Large sample size
    - GHFM-02Medium sample size
    - TPS-EFFMedium sensor for medium sample volume
  - Anisotropic
    - HFM-100Out-of-plane
    - GHFM-02Out-of-plane
    - TPS-EFFOut-of-plane
- ASTM/ISO/EN
  - Column 1
    - HFM-100ASTM C518-17, ISO 8301:1991, EN 12667
    - TLS-100ASTM D7896-14, IEEE 4442-1981
    - THW-L1ASTM D7896-19
    - THW-L2ASTM D7896-19
    - GHFM-02ASTM E1530-19
    - TPS-EFFASTM D7984-16
  - Column 2
    - DSC-L600ASTM/ISO
    - TGA-1000ASTM/ISO
    - TGA-1500ASTM/ISO
Testing Services
Applications
Demo Corner
Resources
About
Contact

Keyword: Dispersion

Total Papers Found: 5

Facile fabrication of multi-walled carbon nanotubes and its enhancement on thermally conductive adhesive applied in heat dissipation devices

Author(s): Junxia Wang, Kelun Yang, Rui Bao, Shilin Yan, Zhongjiang Feng

The purpose of this study was to develop adhesive epoxy resins that used multiwalled carbon nanotubes (MWCNTs) to enhance thermal conductivity and dispersion in the polymer matrix. A Hot Disk ...

Keywords: Amine, Amine-grafted multi-walled carbon nanotubes (MWCNTs), Carbon nanotubes, CNTs, Coupling agent, Crosslinking, density, Dispersion, Field emission scanning electron micrograph (FESEM), Glass transition, Homogeneous, Infrared spectroscopy (FTIR), Multiwalled carbon nanotubes (MWCNTs), Polar forces, resin, Silane, Temperature, Thermal Conductivity, Thermal decomposition, thermal stability, X-ray diffraction (XRD)

Enhanced thermally conductivity and mechanical properties of polyethylene (PE)/boron nitride (BN) composites through multistage stretching extrusion

Author(s): Hong Wu, Liyuan Shen, Shaoyun Guo, Xianlong Zhang

This study aimed to enhance the thermal and mechanical properties of polyethylene (PE)/boron nitride (BN) composites by manipulating the BN concentrations in the matrix and by applying shear fields ...

Keywords: BN, boron nitride, composites, concentration, crystal, Dispersion, Fillers, Heat conductive model, Impact Strength, matrix, mechanical properties, particles, Polyethylene (PE), Rheological, Scanning electron microscope (SEM), Shear field, Storage modulus, Stretching extrusion, tensile strength, Thermal Conductivity

Synthesis and Characterization of Multifunctional Nanocomposites of Toughened Epoxy Reinforced With Carbon Nanotubes

Author(s): Dimitris C. Lagoudas, Patrick J. Klein, Piyush R. Thakre

The authors have developed a method for the functionalization of single-walled carbon nanotubes (SWCNTs). The functionalization of the SWCNTs is useful in helping to produce a better dispersion of nanotubes ...

Keywords: AFM, Carbon nanotubes, CNTs, coefficient of thermal expansion, Coefficient of thermal expansion (CTE), Dispersion, Electrical Conductivity, Epoxy, Flexure Strength, Glass Transition Temperature, nanocomposites, Polymer composites, SEM, Thermal Conductivity, Young's Modulus

Sol-gel route to carbon nanotube borosilicate glass composites

Author(s): Aldo R. Boccaccinia, Boris J. C. Thomasa, Milo S. P. Shafferb

Carbon nanotubes (CNTs) combined with inorganic matrices are not structurally sound unlike singular CNTs which have good mechanical performances. Borosilicate glass, commercially known as Pyrex, is durable but has yet ...

Keywords: Borosilicates, Carbon nanotubes, Carbon nanotubes (CNTs), CNTs, Densification, Dispersion, Electrical Conductivity, glass, Hot Disk, Inorganic-organic binding, Matrix composites, Multiwalled carbon nanotubes (MWCNTs), Sol-gel process, Tetramethylsilane (TMOS), Thermal Conductivity, Transient Plane Source, Transient plane source (TPS) method, Xerogels

Synergetic effect of thermal conductive properties of epoxy composites containing functionalized multi-walled carbon nanotubes and aluminum nitride

Author(s): Chen-Chi M. Ma, Chih-Chun Teng, Kuo-Chan Chiou, Tzong-Ming Lee

This study looked at the use of two different fillers to improve the thermal properties of an epoxy resin. The two fillers were multi-walled carbon nanotubes (MWCNTs) and aluminum nitride (...

Keywords: AlN, Aluminum nitride, Aluminum nitride (AlN), Carbon nanotubes, CNTs, Dispersion, Epoxy, Fillers, Hot Disk thermal analyzer, interfacial adhesion, multi-walled carbon nanotubes, Multi-walled carbon nanotubes (MWCNTs), MWCNTs, Polymer composites, resin, Scanning Electron Microscopy, Scanning Electron Microscopy (SEM), SEM, Thermal Conductivity

Keyword: Dispersion

Facile fabrication of multi-walled carbon nanotubes and its enhancement on thermally conductive adhesive applied in heat dissipation devices

Enhanced thermally conductivity and mechanical properties of polyethylene (PE)/boron nitride (BN) composites through multistage stretching extrusion

Synthesis and Characterization of Multifunctional Nanocomposites of Toughened Epoxy Reinforced With Carbon Nanotubes

Sol-gel route to carbon nanotube borosilicate glass composites

Synergetic effect of thermal conductive properties of epoxy composites containing functionalized multi-walled carbon nanotubes and aluminum nitride

Search Paper Database

Featured Authors

Demonstration Corner

Pin It on Pinterest