The authors state that the TPS technique isn't an accurate method for the measurement of thermal conductivity, thermal diffusivity and volumetric heat capacity of liquids. This is due to the effects of natural convection caused by the sensor which introduce a significant error in the measurements. Six commonly known liquids were investigated using the TPS technique and the obtained values were compared to literature and were found to be significantly ...
The authors used a variety of techniques to determine the thermal properties of polymethyl methacrylate (PMMA), including thermal conductivity, thermal diffusivity, specific heat and density. The measurements are performed in the temperature range from -70°C to 80°C. The results from the different techniques used to characterize the PMMA (GHP, GHF, TPS, THS) are all compared to see whether they agree with one another....
The authors prepare two series of wood sand concretes by using two types of sand concretes (dune and river) and variable amounts of wood shavings in the mixture. The mechanical and thermal properties of the concretes were then studied, using the transient plane source (TPS) technique. The addition of wood shavings to the sand concrete mix improved the strength of the concretes, and didn't have much of an effect on ...
In 1999 an earthquake ripped through Taiwan, which came to be known as the Chi-Chi earthquake. The authors of this paper drilled into the core of the fault created by the earthquake to recover samples that could be analyzed. Using the transient plane source (TPS) technique, the thermal conductivity and thermal diffusivity of the core samples were measured. The thermal properties were measured in order to give information about frictional heat ...
The authors report the synthesis of a novel functionalized graphene sheet (FGS)/silicone porous nanocomposite with varying concentrations of FGS. The physical and thermal properties of the synthesized nanocomposites were studied in depth. SEM and TEM were used to elucidate the physical microstructure of the materials, and the transient plane source (TPS) technique was used to measure thermal conductivity. The nanocomposite showed an increased thermal conductivity as compared to the ...
