As electronic devices approach nanometer scales, heat distribution becomes nonuniform and hot spots begin to form. Integrating graphene into nanoelectronics enhances thermal conductivity and heat flow which mitigates hot spots. In this experiment, large quantities of graphene were produced and thermal conductivity was measured by the transient plane source (TPS) method using an instrument. Results showed that the addition of graphene greatly improved the thermal conductivity of the thermal interface ...
In this paper, cost efficient RVC foams were fabricated from household cleaning pad waste (CPW) and sucrose. A thermal analyzer measured the thermal conductivity of the RVC foams using the transient plane source (TPS) method. Results showed that the thermal conductivity of the CPW foams were significantly lower than Ultramet’s RVC foams which are highly insulative. This study proved that it is possible to reproduce low-cost carbon foams from ...
In this study, ultralow density silica aerogels were synthesized and their thermal conductivities were tested to determine how supercritical drying affected the samples. A thermal analyzer measured the thermal conductivity of the silica aerogels using the transient plane source (TPS) method which determined that the thermal conductivity of silica aerogels increased with temperature....
Phosphosilicate ceramics with varying compositions were synthesized through the sol-gel process and the thermal conductivity of the samples was measured using the transient plane source (TPS) method. Results showed that the thermal conductivity of phosphosilicate ceramic powder was low, but increased slightly with phosphorous concentration. The low thermal conductivity of the ceramics could be useful in thermal barrier applications....
Nitrate materials play an important role in the development of latent thermal energy storage (LTES) systems. This paper examined the thermo-physical properties of sodium nitrate, potassium nitrate and their mixtures with expanded graphite (EG) additives for their applications in solar energy storage. The transient hot-wire method measured the apparent thermal conductivities of the nitrates and nitrates/EG mixtures. Results showed that nitrates/EG mixture PCMs with the highest concentrations of ...
