Join us at the International Thermal Conductivity Conference (ITCC) and the International Thermal Expansion Symposium (ITES).

Thermal Conductivity Paper Database

Thermtest has compiled the world’s largest thermal conductivity academic paper database. The research paper database is dedicated to the Transient Plane Source (TPS), Transient Hot Wire (THW), Transient Line Source (TLS), and Guarded Heat Flow Meter (GHFM). These techniques offer a wide range of applications, which is represented by more than 1000 papers represented in the database! Search academic papers below:

Recommended Papers for: carbon nanotubes

Total Papers Found: 68

Thermal conductivity enhancement of nanostructure-based colloidal suspensions utilized as phase change materials for thermal energy storage: A review

The authors have presented a literature review on computational and experimental studies on the thermal conductivity of nanostructure enhanced phase change materials (nePCMs). It was found that a wide range of nanostructures have been investigated, from carbon nanostructures and carbon nanotubes to metal and metal oxide nanoparticles. The carbon nanostructures and nanotubes were found to generally enhance the thermal conductivity of the PCMs by a greater amount than metal or ...

Author(s): , ,

Thermal Conductivity of Single-Wall Carbon Nanotube Dispersions: Role of Interfacial Effects

The thermal transport properties of nanofluids containing single-walled carbon nanotubes (SWCNTs) in ethylene glycol and (poly)-alpha olefins (PAO) were investigated. It was found that the addition of SWCNTs enhanced the thermal conductivity of each of the two base fluids, with this enhancement increasing as the loading of SWCNTs increased. The authors were able to create an accurate predictive model of the thermal conductivity for these nanofluids by characterizing the ...

Author(s): , , , , , ,

In situ polymerization of methyl methacrylate/multi-walled carbon nanotube composites using cationic stearyl methacrylate copolymers as dispersants

Multi-walled carbon nanotube (MWCNT)/poly (methyl methacrylate) composites were prepared and their mechanical and physical properties were examined. An amphiphilic copolymer was used to aid in dispersing the MWCNTs throughout the composite. It was found that the use of this copolymer resulted in a good dispersal of the MWCNTs without drastically affecting the molecular weights of the composites, so it was concluded that the observed improvements in mechanical properties of ...

Author(s): , , , ,

Thermoelectric behavior of aerogels based on graphene and multi-walled carbon nanotube nanocomposites

This paper proposes conducting carbon aerogels, composed of graphene and multi-walled carbon nanotubes, as an option for a thermoelectric material. The researchers found that this combination of materials increased the electrical conductivity and the Seebeck coefficient due to bridging effects, and decreased the thermal conductivity through high porosity and a uniquely structured 3-D skeleton. Atomic force microscopy and X-ray diffraction were used to quantify the physical structure of the aerogels. ...

Author(s): , , , , , ,

Thermal transport of oil and polymer composites filled with carbon nanotubes

Carbon nanotubes (CNTs) have extremely high thermal conductivity and can raise the thermal conductivity of a polymer matrix when used as an additive. Previous research has shown that random CNT orientation in polymer matrices gives a much lower thermal conductivity value than a specific alignment direction. This project tested the thermal conductivity of oils and polymers. Results were encouraging, with the thermal conductivity of the composites increasing linearly with the ...

Author(s): , , , , , , ,