Join us at the International Thermal Conductivity Conference (ITCC) and the International Thermal Expansion Symposium (ITES).
The purpose of this study was to fabricate and analyze the physical properties of polyacrylate–gold nanocomposites (PGNs) with gold nanoparticles (GNPs) as their nucleation agents. The transient plane source (TPS) method was used to measure the thermal properties of the polyacrylate–gold nanocomposite foams (FPGNs) and PGNs. Results showed that the addition of GNPs improved thermal conductivity of the PGN materials, but as the size of GNPs increased, the ...
The purpose of this this study was to graft polymer chains onto the surface of carbon nanotubes (CNTs) to examine the morphology and thermal properties of the epoxy composites in comparison to multiwalled carbon nanotubes (MWCNTs). A thermal analyzer measured the thermal conductivity of the nanocomposites using the transient plane source (TPS) technique. Results showed that the addition of Glycidyl methacrylate (GMA) to the MWCNTs/epoxy composites significantly enhanced thermal ...
Cadmium sulfide (CdS) nanoparticles were dispersed in a polystyrene (PS) matrix to synthesize semiconducting optical nanocomposites for industrial applications. In this paper, many characteristics of the PS-CdS thick films were studied including thermal conductivity using the transient plane source (TPS) method. Results showed that the thermally conductive CdS nanoparticles enhanced the thermal conductivity of the nanocomposites....
In this paper, thermal properties of CdS and ZnS nanoparticles are examined to understand heat transfer behavior through polystyrene (PS) composites. The transient plane source (TPS) method was used to measure the thermal conductivities of the CdS/PS and ZnS/PS nanocomposites. Results showed that the nanocomposites followed a similar increasing trend until a common temperature where each sample adopted a constant thermal conductivity. Overall, the ZnS/PS nanocomposites showed ...
Multiwalled carbon nanotubes (MWCNT) have applications in the aeronautic industry. This study examined how the concentration of MWCNT affects the electrical and thermal conductivities of nanocomposites. A thermal analyzer (TPS) measured the thermal properties of the nanocomposites using the transient plane source (TPS) technique. Results showed that thermal conductivity of the samples increased with MWCNT concentration and temperature, but the phenoxy-MWCNT nanocomposites had higher thermal properties than the PES-MWCNT nanocomposites....
