Join us at the International Thermal Conductivity Conference (ITCC) and the International Thermal Expansion Symposium (ITES).

Thermal Conductivity Paper Database

Thermtest has compiled the world’s largest thermal conductivity academic paper database. The research paper database is dedicated to the Transient Plane Source (TPS), Transient Hot Wire (THW), Transient Line Source (TLS), and Guarded Heat Flow Meter (GHFM). These techniques offer a wide range of applications, which is represented by more than 1000 papers represented in the database! Search academic papers below:

Recommended Papers for: nanoparticles

Total Papers Found: 86

Effective thermal conductivity of CdS/ZnS nanoparticles embedded polystyrene nanocomposites

In this paper, thermal properties of CdS and ZnS nanoparticles are examined to understand heat transfer behavior through polystyrene (PS) composites. The transient plane source (TPS) method was used to measure the thermal conductivities of the CdS/PS and ZnS/PS nanocomposites. Results showed that the nanocomposites followed a similar increasing trend until a common temperature where each sample adopted a constant thermal conductivity. Overall, the ZnS/PS nanocomposites showed ...

Author(s): , ,

Temperature-dependent thermal conductivity of eicosane-based phase change materials with copper oxide nanoparticles

In this study, pure eicosane and eicosane-CuO solid composites were prepared using ambient and ice-water bath solidification methods. A Thermal Constants Analyzer measured the thermal conductivity of the samples using the transient plane source (TPS) technique. Results showed that for both solidification methods, composite thermal conductivity was independent of temperature up to a point, and the composites with the highest nanoparticle concentrations had the highest thermal conductivity. Although the composites ...

Author(s): ,

The effect of silanize alumina nano-fillers addition on some physical and mechanical properties of heat cured polymethyl methacrylate denture base material 

Despite its fragility, poor thermal properties, and high water sorption rates, polymethyl methacrylate (PMMA) is commonly used in denture fabrication. This study aimed to examine how the addition of Aluminum oxide nanoparticles affected the properties of PMMA. A thermal constant analyzer measured the thermal properties of the Al2O3 nanoparticles using the transient plane source (TPS) method. Results showed that the thermal conductivity and thermal diffusivity of acrylic resin improved ...

Author(s): ,

Synergetic effect of hybrid boron nitride and multi-walled carbon nanotubes on the thermal conductivity of epoxy composites

Adding metallic nanoparticles to a conventional fluid increases the thermal conductivity of the solution. In this study, flaked boron nitride (BN) and high-aspect-ratio multi-walled carbon nanotubes (MWCNTs) were added to epoxy composites to increase thermal conductivity. A thermal analyser measured the thermal conductivity of the nanofluids using the transient plane source (TPS) method. Results showed that adding a small volume of MWCNT to the epoxy composite significantly improved thermal conductivity ...

Author(s): , , , ,

Thermally conductive phase-change materials for energy storage based on low-density polyethylene, soft Fischer-Tropsch wax and graphite 

Phase change materials (PCMs) are becoming increasingly important in the field of thermal energy storage. In this study, conductive fillers were added to wax- and polyethylene-based PCMs to improve their thermal conductivity. A Thermal Constants Analyser measured the thermal conductivity of the PCMs using the transient plane source (TPS) method. Results indicated that both nanoparticles improved thermal conductivity, but a lower concentration of expanded graphite improved conductivity more than normal ...

Author(s): , , ,