Join us at the International Thermal Conductivity Conference (ITCC) and the International Thermal Expansion Symposium (ITES).
The purpose of this study was to measure the thermal properties of ammonia borane and polyiminoborane with the transient plane source (TPS) method to analyze their applicability to heat storage systems. Tests results showed that the thermal diffusivity and thermal conductivity of ammonia borane increased as porosity of the samples decreased. Alternatively, both thermal properties of polyiminoborane increased with porosity, and thermal conductivity values were significantly lower than those obtained ...
Seasonal thermal storage based on phase change materials (PCMs) require a thermally conductive host because they typically have low thermal conductivities. In this study, tannin-based composite carbon foams were prepared using thermally conductive exfoliated graphite (EG) fillers and pMDI additives. A thermal analyzer measured the thermal conductivity of the samples using the transient plane source (TPS) method. Results showed that the EG-carbon foams and the EG/pDMI-carbon foams showed significantly ...
Lithium nitrate trihydrate (LiNO3·3H2O) has many traits that are desirable for thermal energy storage (TES) materials. This study tests the thermophysical properties of LiNO3·3H2O between 253-353 K in comparison to effective TES materials: water and paraffin. A TPS system measured the thermal conductivity of the solid LiNO3·3H2O samples using the transient plane source (TPS) method. Results showed that LiNO3·3H2O had a higher ...