Seven different types of nanocrystals were used as additives in aluminosilicate bricks to determine if this is a valid method of decreasing the thermal diffusivity of the bricks for use as plant coating in the iron and steel industries. Each type of nanocrystal was added in concentration percentages of 0.5, 1, and 2 wt. % to determine the effect of concentration on thermal transport and physical properties. It was found that all of the ...
Author(s): Barbara Federica Scremin, Caterina Lorusso, Claudia Carlucci, Emanuela Filippo, Francesca Baldassarre, Francesca Conciauro, Gaetano Terranova, Giuseppe Ciccarella, Paolo Maria Congedo, Rosaria D'Amato, Viviana Vergaro
A series of Bi(2-x)Sb(x)Te3 powders were prepared via hydrothermal methods by varying x (x=1.45, 1.50, 1.55, 1.56). These powders were then heavily characterized by XRD, EDS, ICP-AES, TEM, SEM and the TPS technique. A low thermal conductivity was desired, so as to give the highest thermoelectric figure of merit (ZT). It was determined that the highest figure of merit was obtained when x=1.55, which resulted in a value of 1.65 ...
Author(s): Chia-Jyi Liu, Hsin -Chang Lai, Liang-Ru Chen, Yen-Liang Liu
Using the transient plane source (TPS) technique, the authors investigated the thermal properties of a series of yttria-stabilized zirconia (YSZ) thermal barrier coatings (TBCs). The YSZ coatings had varying amounts of impurities (Zr, Y, Si, Al oxides) and the amount of impurity affected the post-spray properties of the coating. TBCs are exposed to high temperatures during their regular operation, which can lead to the degeneration of the coating if the ...
Author(s): A. Cipitria, I. O. Golosnoy, L. Xie, M. R. Dorfman, S. Paul, T. W. Clyne
Through the dispersion of graphite nanoplatelets in a silicone matrix and mechanical mixing, graphite nanoplatelet/silicone composites were prepared. These composites were subsequently analyzed by the transient plane source (TPS) technique in order to determine thermal conductivity. DSC and XRD were used to further characterize the composites....
Author(s): Aidan Westwood, Andy Brown, Chris Stirling, Mohsin Ali Raza, Nicole Hondow
Through the use of wood shavings as a filler for sand concretes, the authors have been able to improve the thermal properties of the prepared concrete as well as reuse a waste product. The previously used concrete had a higher thermal conductivity and higher density, and through the addition of wood shavings to the concrete mixture, the density and thermal conductivity of the composites have been lowered. The transient plane ...
Author(s): A. Bali, K. Mezreb, L. Marmoret, M. Bederina, M. M. Khenfer, M. Queneudec
