This study is investigating how the thermal conductivity of a PMMA polymer filled with multi walled carbon nano tubes (MWNT) changes with temperature, and wt % MWNT. Also, the series, parallel, Lewis/Neilson and empirical formula models were used to quantify how well the measured values correlate with the calculated values. The thermal conductivity was measured with a transient plane source (TPS) method. The thermal conductivity of the polymer increased with ...
The goal of this study was to determine how adding CdS nanoparticles to two polymer blends (PS/PVC and PS/PMMA) affects their thermal conductivities. Also, the effect of increasing the wt% of both PVC and PMMA in their respective blends was investigated. The thermal conductivity of the samples was determined through a transient plane method. The thermal conductivity of both polymer blends increased with the addition of CdS nanoparticles. ...
The thermal conductivities of gas hydrates are well documented, but the thermal conductivities of structure H (sH) methane-methylcyclohexane (MCH) hydrate and type A tetrabutylammonium bromide (TBAB) semi clathrate hydrate have no experimental data. The purpose of this study was to determine the thermal conductivities of sH MCH hydrate and TBAB semi clathrate hydrate. The thermal conductivity was measured using a single sided transient plane source (TPS) method. Most gas hydrates ...
The production of closed cell foams has recently advanced as the materials gain interest. The purpose of this study was to use the transient plane source (TPS) method to measure the thermal conductivity of AlSi7 closed cell foams. Results showed that thermal conductivity increased with sample density, and experimental results were higher than the predictions of the theoretical models. Measurements were also carried out on different directions of the samples ...
Intumescent paints protect steel structures from fires by creating insulative foams when heated above a critical temperature. This paper examines the fire resistance capabilities of phenyl silicone coatings in comparison to intumescent paints. A thermal constant analyzer measured the thermal conductivity of the silicone-based coatings using the transient plane source (TPS) technique. Results showed that the silicone/modifier coating consistently had lower thermal conductivities than the silicone coating. At heightened ...
