Metal hydrides (MHs) have been considered as thermal energy storage (TES) materials for concentrated solar thermal applications. In this study, a TES system based on MgH2 was designed, constructed and optimized. The thermal conductivity of the MgH2/TiB2/ENG powder was measured using the transient plane source technique. It was found that the thermal conductivity of a MgH2/TiB2/ENG pellet pressed at 223 MPa for 5 minutes and measured in the ...
This article explored the recent discoveries that have been made regarding the thermal conductivity of polymeric nanocomposites. The thermal conductivities were found using several methods: comparative method, laser flash method, stable state method, the "two thermometer-one heater" method, line-source method and transient plane source (TPS) technique. The TPS technique was used measure the thermal transport properties of nanocomposites in a copolymer matrix....
Hydrothermal methods were used to synthesize nanoplatelets of Bi2-xSbxTe3. In this article, the electrical conductivity, thermopower, and thermal conductivity were the temperature-dependent transport parameters that were determined to calculate the dimensionless figure of merit, ZT. The thermal conductivity measurements were carried out using the transient plane source (TPS) technique with the thermal constants analyzer. The alloy had a low thermal ...
Materials of β-Cu2−xSe were fabricated by using hydrothermal synthesis followed by evacuating-and-encapsulating sintering. These materials were then characterized using powder X-ray diffraction, field-emission scanning electron micrograph, electronic and thermal transport. Thermal conductivity measurements were carried out utilizing transient plane source (TPS) techniques using a thermal constants analyzer. The thermal conductivity of β-Cu2−xSe at room temperature is found to be larger than that ...
Nanostructured SnSe was created using hydrothermal methods and sintering in an evacuated-and-encapsulated ampoule. The effects of the synthesis and thermoelectric properties of SnSe using hydrothermal synthesis at low temperatures followed by evacuating-and-encapsulating sintering were then further investigated to determine their viability. One of the investigations centered around determining the thermal conductivities of the samples. The anisotropy of the thermal conductivity of the pressed polycrystalline SnSe was measured using the transient ...