Using the transient plane source (TPS) method, the thermal conductivities of a series of crosslinked closed-cell polyethylene foams were measured. The experimental values obtained were compared to measurements made by a steady-state method (heat-flow meter). Through the use of the TPS technique, it was possible to observe how physical characteristics such as cell size, density and carbon black content affected the overall thermal conductivity. The authors found that the trends ...
The authors report on the use of the newly developed transient plane source (TPS) technique for the measurement of thermal conductivity and thermal diffusivity of insulators, fluids and metals. The paper describes the theory and experimental setup used, including the sensor and how it works. The experimentally obtained values were compared to literature values and showed good agreement....
For the prediction of thermal conductivity using theoretical models of a composite or mixture of components, the thermal conductivities of the individual components must be known. In this study, the needle probe method was used to measure the thermal conductivity of a mixture of powder and fluid, and using the law of mixtures (Hashin-Shtrikman bounds) the thermal conductivity of the solid phase is estimated. A much simpler method exists though ...
The authors used the transient plane source technique for measuring the thermal conductivity, diffusivity and specific heat of highly porous materials. This paper helped to demonstrate that the newly developed TPS technique wasn't just for the measurement of isotropic bulk materials. Different samples of wood composites were analyzed. Once measurements were obtained using the TPS method, they were compared to results obtained theoretically using Verma's model for prediction of thermal ...
The authors highlight different methods of studying the purity, composition, and structural changes of polymeric and glass materials. These methods include the use of differential scanning calorimetry (DSC) and the transient plane source (TPS) technique. The quality of the TPS Technique is outlined and the authors praise the high quality of the machine. In addition to this, thermal analysis is carried out on some polymeric composites (cis-polyisoprene (CPI)/trans-polyisoprene (TPI) ...
