Join us at the International Thermal Conductivity Conference (ITCC) and the International Thermal Expansion Symposium (ITES).
The authors have presented a literature review on computational and experimental studies on the thermal conductivity of nanostructure enhanced phase change materials (nePCMs). It was found that a wide range of nanostructures have been investigated, from carbon nanostructures and carbon nanotubes to metal and metal oxide nanoparticles. The carbon nanostructures and nanotubes were found to generally enhance the thermal conductivity of the PCMs by a greater amount than metal or ...
Three techniques were compared for the determination of thermal conductivity in poly-alpha-olefin (PAO)-based nanofluids. The three methods that were used were the transient hot wire, transient plane source, and laser flash techniques. The effects of temperature, nanoparticle concentration, and shape on the thermal conductivity were also examined, and these effects were compared to those predicted by a previously determined model. It was found that the transient hot wire technique ...
The authors have developed a model for the estimation of how a nanofluid will work as a coolant without having to perform a number of experiments. The nanofluids used in the study were four water based metallic oxides. These nanofluids were compared to water in terms of thermal conductivity to determine if they would be a good coolant. The model that was developed involved the calculation of the highest wall ...
The transient technique is the commercial method used to test the thermal conductivity, thermal diffusivity, and specific heat of solids. With the instrument, a double spiral nickel sensor is sandwiched between two homogenous samples, and as the sensor pulses electrical currents through the sample, it simultaneously measures how long it takes for the temperature of the sample to increase. This method is typically used on glasses, insulating materials, and polymer ...
Through the use of wood shavings as a filler for sand concretes, the authors have been able to improve the thermal properties of the prepared concrete as well as reuse a waste product. The previously used concrete had a higher thermal conductivity and higher density, and through the addition of wood shavings to the concrete mixture, the density and thermal conductivity of the composites have been lowered. The transient plane ...