A study of the through-plane thermal conductivity of various gas diffusion layer materials (GDL) and the thermal contact resistance between the GDL and an electrolytic iron surface as a function of compression load. These factors were anaylized with the intention of gaining knowledge about in-situ fuel cells. Thermal conductivity measurements were taken by a modified version of the guarded heat flux meter ...
The through-plane thermal conductivity of many components of a fuel cell, dry NafionĀ®, various diffusion medias and catalyst layers are studied. The thermal contact resistance between the diffusion media and a metal plate with respect to temperature and pressure was also determined. The measurements were made with a guarded heat flow meter device. The least accurate measurement was of the Toray carbon ...
In this paper, a new method is proposed for measuring the through plane thermal conductivity of two catalyst layers of different thicknesses by the guarded heat flow meter (GHF) method, and the transient plane source method (TPS). These catalyst layers were made from two catalyst-coated substrates. The effects of pressing, and hot pressing the layers were also studied and shown to have ...
Carbon/liquid-crystal polymer composites were formulated. Composites containing one of three types of carbon filler, composites containing two types of carbon filler, and composites containing all three types of carbon filler were prepared to test not only the effect of each filler on the thermal conductivity of the composite, but also the effect of combining fillers. The anisotropic method on a TPS system was used for the thermal conductivity measurements. ...
Three different carbons (carbon black, synthetic graphite particles and carbon fiber) were added to Vectra A950RX Liquid Crystal Polymer in order to synthesize different composites for use in fuel cells. The carbon fillers were used individually and also in combination with other carbon fillers. A TPS was used to measure the thermal conductivities of the synthesized composites. It was found that the use of synthetic graphite particles as the ...
