An investigation was conducted to determine the thermal properties of different types of gypsum boards from the USA and Japan. The thermal conductivity and specific heat were determined at room temperature using the transient plane source technique. Measurements were first performed with the paper backing still on the boards, and then once the backing had been removed. Removing the paper resulted in a change in the specific heat, but the ...
Thermophysical properties of a uranium-6 wt. % zirconium alloy were investigated at high temperatures to evaluate the performance of the alloy as a driver fuel for a liquid-metal cooled fast reactor. Of particular interest to the authors were the coefficient of thermal expansion, the specific heat, and the thermal conductivity of the alloy....
Zr-Cu-Al metallic glasses were formulated with differing compositions to determine their thermophysical properties. It was determined that by decreasing the zirconium content of the metallic glass, the thermal conductivity can be increased. The maximum value of thermal conductivity was found for the metallic glass with a composition of Zr:Cu:Al = 50:39.3:10.7 (at. %). It was found that although the metallic glasses did not crystallize with heat treatment below Tg, they did ...
The mechanical and thermal properties of blends of cis-polyisoprene (CPI) and trans-polyisoprene (TPI) are investigated and compared to those of the pure elastomers. It was found that the elastic modulus and tensile strength increased with increasing TPI content and that the thermal conductivity, thermal diffusivity, and specific heat of the blends also increased with increasing TPI content. In contrast to this trend, the measured thermal properties of pure TPI were ...
A composite phase change material (PCM) was formulated from commercial blended paraffin and a styrene-butadiene-styrene block. The thermo-physical properties of this composite PCM were then evaluated using the transient plane source method and differential scanning calorimetry. It was determined that there was a significant difference in the thermal conductivity of the PCM in the solid state when compared to that in the liquid state. The second part of this study ...
