Phase change materials (PCMs) are an attractive solution for reducing energy usage because of their efficient latent heat storage abilities. This paper examined chemical and physical properties of micro-PCMs before and after their integration with concrete samples. A Thermal Constants Analyser (TPS) measured the thermal conductivity of the PCM-concrete using the transient plane source (TPS) method. Results showed that overall, the thermal conductivity of the concrete was unchanged after the ...
Thermophysical and structural properties of sintered ore particles (SOPs) were determined to expand upon the little documented information there is regarding the properties of these materials. In addition to this, a fractal model was also developed for the prediction of thermal conductivity in SOPs as a function of porosity. The experimental results revealed that the specific heat capacity increased with increasing temperature and that the thermal conductivity decreased with increasing ...
The potential of the transient plane source (TPS) technique for the testing of thermo-physical properties of hydrogen storage materials is evaluated. To do this, stacks of interleaved samples of stainless steel 316L, Teflon, and Lexan were tested for thermal conductivity using the anisotropic module in the TPS software. It was determined that the axial and radial thermal conductivities were as expected with the exception of the presence of some deviation ...
Using the transient plane source (TPS) technique, researchers measured the thermal conductivity, thermal diffusivity and specific heat capacity of an electrically insulating ceramic material prepared from kaolin and feldspar. The electroceramic was tested at multiple temperature points to see how it affected thermal conductivity. Thermal properties were strongly affected by temperature, and the ceramic material studied had the highest thermal conductivity and thermal diffusivity at the highest temperature tested. The ...
Using the transient plane source (TPS) technique, the effect of addition of pine tree particles to styrene butadiene rubber is studied. Thermal conductivity, thermal diffusivity, specific heat capacity and density were all investigated. Varying amounts of the pine tree filler particles were added to the polymer matrix in order to form composites. Increasing amounts of the pine tree filler resulted in higher thermal conductivity and thermal diffusivity, with decreasing specific ...
