Agro-composite materials were produced from flax shaves and the properties of these composites were determined experimentally. The structure and morphology of the composites was determined by scanning electron microscopy (SEM), and their thermal conductivities were determined using the transient plane source method. These properties, as well as mechanical, hydric, and acoustic properties were determined as a function of the structure and size of the flax shaves....
In this paper, the authors discuss the preparation of microencapsulated phase change materials (PCMs). The PCMs used in this study were n-hexadecane and n-octadecane, and the shell was made up of poly(urea-formaldehyde). The effect of dispersing silver nanoparticles in the shells on the thermal storage properties of these encapsulated PCMs was also investigated. The enthalpies of fusion of the samples were determined experimentally, as was the thermal conductivity. It ...
The thermal conductivities of paraffin-based composite phase change materials (PCMs) containing different types of graphene nanoparticles were determined using the transient plane source method. It was determined that the thermal conductivity was increased by the addition of the nanoparticles, and the enhancement was greater for composites containing larger, and stiffer nanoparticles....
Polyactic acid (PLA)-micro hexagonal boron nitride (hBN)-graphene nanoplatelet (GNP) polymer composites were prepared, and the effects of varying filler contents on the thermal and mechanical properties of the polymer composites were investigated. It was determined that the addition of the GNPs resulted in a decrease in thermal conductivity in comparison to a PLA-hBN composite unless the GNP:hBN ratio was 1:1, where the thermal conductivity was equal to that ...
Poly(trimethylene terephthalate)-block-poly(tetramethylene oxide) (PTT-PMTO) copolymer-based nanocomposites containing a combination of single-walled carbon nanotubes (SWCNTs) and graphene nanoplatelets (GNPs) as carbon nanofillers were investigated to determine their thermal conductivities. Nanocomposites having a total carbon nanofiller concentration of 0.4 and 0.6 wt. % were preparared with varying amounts of each nanofiller, and the thermal conductivity was measured using the transient plane source (TPS) method. The dispersion of the nanofillers was observed by ...
