Join us at the International Thermal Conductivity Conference (ITCC) and the International Thermal Expansion Symposium (ITES).

Thermal Conductivity Paper Database

Search academic papers below:

Recommended Papers for: Scanning Electron Microscopy (SEM)

Total Papers Found: 87

Evaluation of energy band gap, thermal conductivity, phase transition temperature and elastic response of PS/CdS semiconducting optical nanocomposite 

Cadmium sulfide (CdS) nanoparticles were dispersed in a polystyrene (PS) matrix to synthesize semiconducting optical nanocomposites for industrial applications. In this paper, many characteristics of the PS-CdS thick films were studied including thermal conductivity using the transient plane source (TPS) method. Results showed that the thermally conductive CdS nanoparticles enhanced the thermal conductivity of the nanocomposites....

Author(s): , , ,

Development of high void fraction polylactide composite foams using injection molding: Mechanical and thermal insulation properties 

Polylactide (PLA) is a biodegradable polyester with a wide range of applications in transportation and construction industries. In this study, the physical and mechanical properties of low void fraction PLA foams and high void fraction PLA composite foams were examined after their fabrication using the high-pressure foam injection molding (HPFIM) process. A thermal constants analyzer measured the thermal conductivity of the samples using the transient plane source (TPS) method. Results ...

Author(s): , , , ,

Thermal conductivity enhancement with different fillers for epoxy resin adhesives

As technology advances, improving the efficiency of heat dissipation by thermal adhesives in electronic devices is becoming increasingly important. In this study, a thermal constants analyzer measured the thermal conductivities of eight different epoxy resin thermal adhesives using the transient plane source (TPS) method. Results showed that the layer-structure fillers enhanced the thermal conductivity of the epoxy matrix the most, while the sharp corner-shaped fillers had the lowest impact on ...

Author(s): , , ,

An experimental investigation of melting of nanoparticle-enhanced phase change materials (NePCMs) in a bottom-heated vertical cylindrical cavity

A nanoparticle-enhanced phase change material (NePCM) is prepared by the dispersal of carbon nanotubes in 1-dodecanol. The objective of this experiment was to determine if the addition of nanoparticles could increase the thermal conductivity of the base PCM while resulting in a NePCM that would still have the required properties of a functional PCM. It was found that the thermal conductivity was enhanced through the addition of the carbon nanotubes; ...

Author(s): , , , ,

Factors influencing thermal conductivity and mechanical properties in 319 Al alloy cylinder heads

Although much research had been conducted to improve the ability of engine cylinder heads to respond to thermal stresses, not much research had been conducted on reducing thermal stresses. The authors set out to determine the thermal conductivity of a commercial aluminum 319 type alloy cylinder head with the future goal of improving the thermal conductivity of cylinder heads to better reduce the stress induced by increasing temperature. The cylinders were ...

Author(s): , , , , ,