The authors have investigated the use of silver nanomaterials as a filler in epoxy resin in an effort to identify a composite resin with a high thermal conductivity for application as a thermal interface material. It was determined that the addition of silver nanoparticle and silver nanowires both increased the thermal conductivity of the resin, but the silver nanowires caused a much more drastic increase. It was found that by ...
The authors present a method of preparation of TiO2 nanotubes by alkaline treatment (with NaOH) of TiO2 particles followed by acid-washing and annealing treatment. Theoretical and experimental studies on the thermal conductivity of TiO2 nanotubes is also presented. The thermal conductivity values determined experimentally matched well with theoretical values obtained. It was found that TiO2 nanotubes had a lower thermal conductivity than the original TiO2 particles. This phenomenon was attributed ...
Electronics packaging is fast paced area of research as scientists work to keep up with the new demands of smaller, more powerful electronic devices. In this study, researchers looked at how the manufacturing technique used to create vapour grown carbon nanofiber (VGCNF)/rubbery epoxy composites affects the thermal conductivity, electrical conductivity and mechanical properties of the final product. Samples were produced by one of three methods: mechanical mixing (MM), three-roll ...
In an effort to be more environmentally friendly, the construction industry is investing more in 'green' concretes and insulation materials. The purpose of this research was to create a porous foam using a geopolymer mixture and varying amounts of silica carbide sludge. By changing the amount of the sludge added, researchers could control what type of microstructure was produced. The effect of this variation on porosity and thermal properties was ...
This study aimed to enhance the thermal and mechanical properties of polyethylene (PE)/boron nitride (BN) composites by manipulating the BN concentrations in the matrix and by applying shear fields in laminating-multiplying elements (LMEs). A thermal constants analyzer measured the thermal conductivity of the PE/BN composites using the transient plane source (TPS) method. Results showed that the thermal conductivity of the composites increased with BN concentration. As well, the ...