Low-density microcellular non-isocyanate polyurethane (NIPU) foams were prepared using biological compounds and carbon dioxide. The morphology of these foams was investigated by scanning electron microscopy (SEM), and the thermal conductivity was determined using the transient plane source (TPS) method. It was concluded that a study needed to be undertaken to determine how to fine tune the morphology of the foams in order to decrease the thermal conductivity of the foams....
Composite spray coatings containing Al2O3 and AlN were prepared and their tensile bonding strength, microhardness, corrosion behavior and thermal conductivity were compared to those of pure Al2O3. The goal of this study was to identify a spray coating with an improved thermal conductivity over that of Al2O3 for use in coating heat exchangers, furnace walls, heat pipes, etc. The coatings that were prepared had AlN : a-Al2O3 ...
Thermophysical properties of a uranium-6 wt. % zirconium alloy were investigated at high temperatures to evaluate the performance of the alloy as a driver fuel for a liquid-metal cooled fast reactor. Of particular interest to the authors were the coefficient of thermal expansion, the specific heat, and the thermal conductivity of the alloy....
Coal fly ash was used as the base material for the formation of thermal insulation materials. The porosity of the produced materials ranged from 86.3-94.5 vol. %. The insulating materials were prepared by ball milling, followed by foaming assisted by the addition of K12, casting and drying, and finally sintering. No harmful chemicals were released to the environment during their preparation. It was found that the thermal conductivity of the samples ...
Sulfonated polystyrene-block-poly(ethylene-ran-butylene)-block-polystyrene (SPSPB) was used as a polymer matrix to create polymeric nanocomposites using graphite (G) and graphite-polyoxometalate (G-POM) as fillers. It was found that the nanocomposites had higher thermal and electrical conductivities than SPSPB alone, and that both the thermal and the electrical conductivity increased with increasing filler concentration. At all filler contents tested, the SPSPB/G-POM had both a higher thermal conductivity and a higher electrical ...
