In this study, various filler loadings of thin graphite sheets were added to epoxy adhesives to improve thermal conductivity. Natural graphite powder and graphite nanoflakes were used as reference fillers in the same resin, and the thermal conductivity of each filler was measured with a TPS thermal constants analyzer based on the transient plane source (TPS) method. Results showed that the graphene sheets enhanced the thermal conductivity by more than 22 ...
The aim of this study was to fabricate transparent polymers with high thermal conductivities for applications in electronic packaging. Characteristics of the inorganic filler, calcium fluoride (CaF2), and the polymer matrix were examined, and thermal conductivity was measured using a thermal analyzer based on the transient plane source (TPS) method. Results showed that the thermal conductivity of the composites increased with CaF2 content. This study was the first to report ...
Asphalt solar collector (ASC) is a conductive asphalt concrete and an eco-friendly method to de-ice roadways. This study examined if the addition of conductive fillers and various mixing parameters could improve the thermal conductivity and energy efficiency of ASC. A thermal conductivity system measured the thermal conductivity of the concrete samples using the transient plane source (TPS) method. Results showed that thermal conductivity was mostly improved by higher asphalt temperatures, ...
A novel technique was used in this research article, to introduce a hybrid mesh to a polymer composite within bipolar plates, for proton exchange membrane fuel cells (PEMFCs). The mesh added was copper or aluminum based, to allow for an increased thermal conductivity of the PEMFCs. Experimental testing confirms this theory, as the copper-meshed hybrid polymer composite showed a thermal conductivity of 30.0 W/mK, while the aluminum-meshed hybrid polymer composite ...
In this article, researchers studied the effect of particle shape on the thermal conductivity of copper reinforced polymer composites. Short-fiber shaped polyamide composites with filler content ranging from 0 to 30 % were measured, alongside of polyamides containing 0 to 60 % filler, shaped as spheres and plates. When the filler content is low, particles are not interacting with each other, and therefore the thermal conductivity is low. As the filler percentage increases to 10%, an immediate ...
