Multiwalled carbon nanotubes (MWCNT) have applications in the aeronautic industry. This study examined how the concentration of MWCNT affects the electrical and thermal conductivities of nanocomposites. A thermal analyzer (TPS) measured the thermal properties of the nanocomposites using the transient plane source (TPS) technique. Results showed that thermal conductivity of the samples increased with MWCNT concentration and temperature, but the phenoxy-MWCNT nanocomposites had higher thermal properties than the PES-MWCNT nanocomposites....
Iron cores are important units of electromagnetic devices but lack the ability to be shaped into three-dimensional objects. Soft magnetic moldable composites (SM2C) are new materials that can possibly substitute iron cores because of their malleability. The aim of this study was to explore the physical and chemical properties of SM2Cs to determine their range of applications. The thermal conductivity of SM2Cs was measured using the transient ...
Adding conductive fillers to polymer resins improves the thermal conductivity of the polymers. In this study, Thermocarb TC-300 synthetic graphite and Fortafil 243 carbon fiber were added to Vectra A950RX liquid crystal polymer (LCP) to produce anisotropic single and multiple filler composites. A Thermal Constants Analyzer measured the thermal conductivity of the composites using the transient plane source (TPS) technique. The formulations that contained Thermocarb fillers had higher in- and ...
The authors have developed a method for the functionalization of single-walled carbon nanotubes (SWCNTs). The functionalization of the SWCNTs is useful in helping to produce a better dispersion of nanotubes throughout a polymer matrix. Better dispersion of nanotubes was thought to result in an improvement in the mechanical, electrical, and thermal properties of nanocomposite polymers. It was determined that the method produced effective surface modification of the nanotubes. The elastic ...
Various microfibrillar composites were prepared in situ using boron nitride as a thermally conductive filler. The multistage stretching extrusion process was used in an effort to improve thermal conductivity and mechanical properties. It was found that the addition of laminating-multiplying elements (LMEs) improved the dispersion of BN in the composite polymers and they also improved the tensile and impact strength of the polymers. It was also found that the thermal ...
