Epoxy resin/silicon carbide (Ep/SiC) composites were prepared by the casting method and subsequently characterized for their mechanical and thermal properties. It was determined that an increasing mass fraction of SiC in the epoxy resin resulted in increasing thermal conductivity of the composites. Using 50 wt.% SiC resulted in a thermal conductivity of 0.7152 W/mK, which is three times that of pure epoxy resin. Mechanical properties peaked with 10 wt.% SiC. ...
The addition of graphene nanoplatelets (GNP) to a paraffin-based solvent, eicosane was performed at various wt.% and subsequently the synthesized GNP/eicosane composites were analyzed by a variety of machines. The characterization of the GNP/eicosane composites was performed by the TPS technique for the measurement of thermal conductivity from 10°C to 35°C. At a wt.% of 10 GNP filler the composite had a thermal conductivity four times that of unfilled ...
The present study look at the creation of unfilled and carbon nanofibre (CNF)-filled polypropylene (PP) foams, and their subsequent testing of thermal and mechanical properties. The testing of thermal properties was accomplished by the TPS Technique and determined that when using up to 20 wt.% CNF as filler there was no increase in thermal conductivity of any of the sample foams. Therefore it was decided that it was the foamed ...
Microencapsulated phase change materials (MPCMs) are excellent materials for the storage of thermal energy, and through their dispersal into a carrier fluid, microencapsulated phase change slurries (MPCS) can be prepared. These slurries exhibit both excellent thermal energy storage and heat transfer properties. A series of MPCS were prepared for this research and subsequently tested for thermal conductivity and specific heat. Other methods of quantification include DSC, TGA, rheometry, and infrared ...
The analysis of a pultruded E-glass reinforced polyester (GFRP) composite is performed by TGA, DSC and DMA methods. The data obtained from these analysis methods agreed well with theoretical models applied to the GFRP. The specific heat capacity of the composite was found to decrease over heating and the decomposition process....
