Join us at the International Thermal Conductivity Conference (ITCC) and the International Thermal Expansion Symposium (ITES).
Multiple studies claiming the usefulness of nanofluids for the enhancement of heat transport have been proven ill-founded. Although they have significantly raised thermal conductivities, there is an inerrant increase in viscosity when adding nanoparticles to a liquid. This paper explores areas of research that analyze nanofluid properties that could potiential indicate future applications. A promising direction is using particles that can change ...
A detailed development of a local heat transfer probe specifically designed for analyzing nanofluids. In this paper iron oxide is used as a test subject to determine the accuracy of the probe. Different concentrations were measured ranging between 0 and 0.09% by volume. Thermal conductivity is also measured by a TLS-100 instrument, based on the transient line source. It is shown that the heat ...
This article studied the thermal conductivity values and measurements for the following two systems using the transient hot wire (THW) and transient plane source (TPS) techniques: ethylene glycol with added CuO, TiO2, or Al2O3 nanoparticles and water with added TiO2 or Al2O3 nanoparticles or multiwall carbon nanotubes (MWCNTs). A TPS technique using a thermal conductivity analyzer ...
This article studied the flow and thermal transport characteristics of a ferrofluid based on transformer oil (Mogul Trafo CZ-A) and iron oxide nanoparticles. The thermal conductivity, specific heat, and thermal diffusivity were calculated using the transient plane source (TPS) method and a thermal constants analyzer was used for performing the measurements. It was found that the presence of the magnetic nanoparticles in the transformer oil (3%) increased its thermal conductivity by ...
This article reviewed the use of phase change materials (PCM) as thermal energy storages (TES) as they can be used to substitute large-scale energy demand and assist both economically and environmentally. The thermophysical properties of different phase change materials were studied to assess their viability for thermal storage systems. One of their most common problems with using PCMs is their poor heat transfer rates. This was seen when the transient ...
