Thermal Conductivity Paper Database

Thermtest has compiled the world’s largest thermal conductivity academic paper database. The research paper database is dedicated to the Transient Plane Source (TPS), Transient Hot Wire (THW), Transient Line Source (TLS), and Guarded Heat Flow Meter (GHFM). These techniques offer a wide range of applications, which is represented by more than 1000 papers represented in the database! Search academic papers below:

Recommended Papers for: energy storage

Total Papers Found: 31

An innovative asphalt patch repair pre–heating method using dynamic heating

This article studied a new asphalt pavement patch repair method that used dynamic infrared pre-heating. The thermophysical properties of the asphalt mixture were measured because they affect heat transfer and ...

Author(s): , ,

Review of latent heat thermal energy storage for improved material stability and effective load management

This article reviewed the use of phase change materials (PCM) as thermal energy storages (TES) as they can be used to substitute large-scale energy demand and assist both economically and ...

Author(s): , ,

Selection principles and thermophysical properties of high temperature phase change materials for thermal energy storage: A review

This article examined the capacity of phase change materials (PCM) to act as phase change thermal energy storages (TES). The review also investigated the thermophysical properties of high temperature PCMs, ...

Author(s): , , , , , ,

Enhanced thermal conductivity of n octadecane containing carbon based nanomaterials

This paper focused on determining the thermal conductivity of multiwalled carbon nanotubes (MWCNTs) and carbon nanofibers (CNFs) that were dispersed throughout n-octadecane as phase change materials (PCMs). The Thermal Constants ...

Author(s): , ,

Thermal performance enhancement of palmitic-stearic acid by adding graphene nanoplatelets and expanded graphite for thermal energy storage: A comparative study

The purpose of this study was to improve the wettability of silicon carbide (SiC) nanowires, in order for them to be used as thermoconductive fluids. Multiple experiments were conducted by ...

Author(s): , , , ,

A capric–palmitic–stearic acid ternary eutectic mixture/expanded graphite composite phase change material for thermal energy storage

This study suggested the use of capric acid–palmitic acid–stearic acid ternary eutectic mixture/expanded graphite (CA–PA–SA/EG) composite phase change material (PCM), as a low-temperature heat ...

Author(s): , , , , ,

Thermophysical Properties of Potassium Fluoride Tetrahydrate from (243 to 348) K

In this study, potassium tetrahydrate is being considered as a strong thermal energy storage material. Potassium tetrahydrate possess a low melting temperature and displays a large specific and volumetric enthalpy ...

Author(s): ,

Preparation and thermal properties of porous heterogeneous composite phase change materials based on molten salts/expanded graphite

This article discussed the creation of phase change composite materials using molten binary salts and expanded graphite (EG). Three different salts were used, LiNO3–KCl, LiNO3–NaNO3 and LiNO3–NaCl. ...

Author(s): , , , , ,

Thermal energy storage characteristics of Cu–H2O nanofluids

The ability of Cu-H2O nanofluids to perform as phase change materials (PCMs) is investigated. The supercooling behavior of the nanofluids was determined as a function of copper nanoparticle concentration. ...

Author(s): , , ,

Thermal energy storage performance of paraffin-based composite phase change materials filled with hexagonal boron nitride nanosheets

A paraffin-based composite phase change material (PCM) was prepared by the addition of hexagonal boron nitride (h-BN) nanosheets to melted paraffin wax followed by vigorous stirring. The nanosheets were added ...

Author(s): , , , , , , , , ,

Influence of the Presence and Amount of Metal Nanoparticles on the Thermal and Mechanical Properties of iPP/Soft Paraffin Wax Phase Change Materials for Thermal Energy Storage

Nanocomposite phase change materials (PCMs) were prepared by adding silver nanoparticles to isotactic polypropylene (iPP) and an iPP/paraffin wax phase change materials. The Ag nanoparticles were found to be ...

Author(s):

Possibilities of using thermal mass in buildings to save energy, cut power consumption peaks and increase the thermal comfort

The work presented in this thesis was performed in order to generate knowledge of heat storage in building structures. The goal was to discover what material could most effectively reduce ...

Author(s):

Engineering improvement of NaAlH4 system

This article is based on research that has been done to improve hydrogen storage systems with on-board reversible metal hydrides. The study involved the compaction of the sodium aluminum hydride ...

Author(s): , , , , , , , ,

Thermal Conductivity Enhancement by using Nano-Material in Phase Change Material for Latent Heat Thermal Energy Storage Systems

Al2O3, TiO2 nanoparticles, and carbon nanotubes were added to Iraqi paraffin wax in varying quantities to determine the optimum filler content for the enhancement of thermal conductivity. The thermal ...

Author(s): , ,

Thermal energy storage and release of a new component with PCM for integration in floors for thermal management of buildings

A composite phase change material (PCM) was formulated from commercial blended paraffin and a styrene-butadiene-styrene block. The thermo-physical properties of this composite PCM were then evaluated using the transient plane ...

Author(s): , ,