Join us at the International Thermal Conductivity Conference (ITCC) and the International Thermal Expansion Symposium (ITES).
Carbon nanotubes (CNTs) combined with inorganic matrices are not structurally sound unlike singular CNTs which have good mechanical performances. Borosilicate glass, commercially known as Pyrex, is durable but has yet to be successfully fabricated using the sol-gel technique. In this paper, the sol-gel technique was used to manufacture borosilicate glass matrix composites with multi-walled carbon nanotubes (MWCNTs). The technique measured thermal conductivity of the materials using the transient plane source (...
A series of chalcogenide glasses were prepared by substituting In into Se80Te20 to replace Te. The transient plane source (TPS) technique was then used to measure the thermal conductivity, thermal diffusivity and specific heat of the glass samples. It was determined that the substitution of Te with In caused the thermal conductivity of the sample to increase, although specific heat values remained nearly constant. Specific heat was also determined ...
Thermal conductivity and thermal diffusivity were simultaneously measured using the transient plane source (TPS) technique. These values were measured during heating from 303 to 323 K and cooling from 323 to 303 K. It was determined that both thermal conductivity and diffusivity were at their maximum at 313 K, which is in the range of the glass transition temperature....
The authors highlight different methods of studying the purity, composition, and structural changes of polymeric and glass materials. These methods include the use of differential scanning calorimetry (DSC) and the transient plane source (TPS) technique. The quality of the TPS Technique is outlined and the authors praise the high quality of the machine. In addition to this, thermal analysis is carried out on some polymeric composites (cis-polyisoprene (CPI)/trans-polyisoprene (TPI) ...
The analysis of a pultruded E-glass reinforced polyester (GFRP) composite is performed by TGA, DSC and DMA methods. The data obtained from these analysis methods agreed well with theoretical models applied to the GFRP. The specific heat capacity of the composite was found to decrease over heating and the decomposition process....