Join us at the International Thermal Conductivity Conference (ITCC) and the International Thermal Expansion Symposium (ITES).
Many conventional fluids have low thermal conductivities. Adding thermally conductive nanometer-sized particles to these fluids transforms them into thermally conductive nanofluids. In this study, the thermal conductivity of aqueous alumina and multi-walled carbon nanotube (MWCNT) nanofluids was measured using the transient plane source (TPS) method with a thermal constants analyzer TPS. During each trial, 0.015 W of power were administered to each sample for two seconds. Results of the experiment showed ...
Many conventional fluids have low thermal conductivities. Adding thermally conductive nanometer-sized particles to these fluids transforms them into thermally conductive nanofluids that can be used for refrigeration and air conditioning systems. In this paper, the transient plane source (TPS) method is used to explore the thermal conductivity of multi-walled carbon nanotube (MWCNT) nanofluids in a helically coiled, double-pipe heat exchanger. The thermal conductivities of the MWCNT nanofluids were measured using ...
Nanofluids are relatively new materials that are composed of liquids containing solid nanoparticles ranging from 1-100 nm. This study examined the thermal conductivity of Al2O3 (aluminum oxide)-H2O nanofluids in water under multiple pH and sodium dodecylbenzenesulfonate (SDBS) conditions. A transient plane source (TPS) was used to measure the thermal conductivities of the samples. It was found that when the pH of the nanofluid reached approximately 8.0, the solution ...
The purpose of this study was to improve the wettability of silicon carbide (SiC) nanowires, in order for them to be used as thermoconductive fluids. Multiple experiments were conducted by exposing the SiC nanowires to hydrofluoric acid, tetraethyl orthosillicate, polyvinylpyrolidone and sodium hydroxide. Various tests, including x-ray diffraction, Fourier transformation-infrared, x-ray photoelectron spectroscopy, thermogravimetric analysis, scanning electron microscopy and transmission electron microscopy, were performed on these various materials to identify ...
The ability of Cu-H2O nanofluids to perform as phase change materials (PCMs) is investigated. The supercooling behavior of the nanofluids was determined as a function of copper nanoparticle concentration. The contact angle and thermal conductivity of this PCM were also determined experimentally. Based on the experimental results, the authors conclude that these nanofluids could be useful in thermal energy storage applications....
