Join us at the International Thermal Conductivity Conference (ITCC) and the International Thermal Expansion Symposium (ITES).

Thermal Conductivity Paper Database

Thermtest has compiled the world’s largest thermal conductivity academic paper database. The research paper database is dedicated to the Transient Plane Source (TPS), Transient Hot Wire (THW), Transient Line Source (TLS), and Guarded Heat Flow Meter (GHFM). These techniques offer a wide range of applications, which is represented by more than 1000 papers represented in the database! Search academic papers below:

Recommended Papers for: nanoparticles

Total Papers Found: 86

Alignment of carbon nanotubes comprising magnetically sensitive metal oxides in heat transfer nanofluids

High speed microscopy was used to allow real time visualization of the movement of nanoparticles made up of single-walled carbon nanotubes (SWCNT) and Fe2O3. An electrostatic force was induced to the nanotube/Fe2O3 composite and caused perfect conjugate structures which result in excellent thermal, electrical, and mechanical properties. The alignment of the carbon nanotubes in nanosuspensions may offer new opportunities for the development of nanofluids....

Author(s): , , , ,

Study on dispersion behavior and thermal conductivity of Cu-H2O nanofluids

The addition of Cu nanoparticles to water was studied at different pH values and different dispersant concentrations by the measurement of zeta potential and absorbency. Thermal conductivity was measured. It was found that the ideal properties of the nanofluid were obtained at pH 9.5....

Author(s): , , , , ,

Viscosity and thermal conductivity measurements of water-based nanofluids containing titanium oxide nanoparticles

This article looks at the thermal properties of titanium oxide (TiO2) based nanofluids and their applications as thermal vectors. The nanoparticle size was studied by dynamic light scattering (DLS) and the stability was measured by Zeta potential. The concentrations of TiO2 used ranged from 1 to 35% by mass in the water-based nanofluid. Thermal conductivity was measured and the effects of concentration of TiO2 and temperature on the thermal conductivity were studied. ...

Author(s): , ,

Influence of pH on Nanofluids- Viscosity and Thermal Conductivity

This article outlines the effect of adding Al2O3 and Cu nanoparticles to water and measuring the thermal conductivities and viscosities of the mixtures. The effect of pH was taken into account and it was found that there are optimal pH values for each of the nanoparticle mixtures that give the highest thermal conductivities and lowest viscosities. Research shows that thermal conductivity and viscosity are closely related to each other. ...

Author(s): ,

Effects of pH on heat transfer nanofluids containing ZrO2 and TiO2 nanoparticles

This study looks at the effects of pH on heat transfer, among other things, of nanofluids. Over 20% enhancement of thermal conductivity was noted with nanofluids containing 3wt% zirconium dioxide and titanium dioxide. Also noted, was the influence of pH on the stability of the nanofluids. The Derjaguin-Landau-Verwey-Overbeek theory states that nanoparticles become unstable, form clusters and precipitate, when their pH is near the isoelectric point. This leads to large clusters ...

Author(s): , , ,