Join us at the International Thermal Conductivity Conference (ITCC) and the International Thermal Expansion Symposium (ITES).

Thermal Conductivity Paper Database

Thermtest has compiled the world’s largest thermal conductivity academic paper database. The research paper database is dedicated to the Transient Plane Source (TPS), Transient Hot Wire (THW), Transient Line Source (TLS), and Guarded Heat Flow Meter (GHFM). These techniques offer a wide range of applications, which is represented by more than 1000 papers represented in the database! Search academic papers below:

Recommended Papers for: thermal insulation

Total Papers Found: 67

Carbon fiber reinforced carbon aerogel composites for thermal insulation prepared by soft reinforcement

In order to improve the brittleness and shrinkage experienced by carbon aerogels during the drying process, carbon fibers were added to the aerogel. Supercritical drying was used in order to generate the aerogels, and a machine was used to measure the thermal conductivity of the synthesized aerogels. This new method resulted in crack-free carbon fiber reinforced aerogel composites and may lead to more applications for carbon aerogels....

Author(s): , ,

Glass foams from dismantled cathode ray tubes

Glass components recovered from dismantled cathode ray tubes (CRTs) are very difficult to recycle or reuse and so other methods of using these glass components must be found to prevent environmental problems. Through the mixing of the recovered glass with calcium carbonate powder, glass foams can be synthesized that have applications in thermal and acoustic insulation. The various effects on the sintering process such as heating rate and holding time ...

Author(s): ,

Synthesis of hollow silica nanospheres by sacrificial polystyrene templates for thermal insulation applications

In this paper, researchers synthesized monodispersed polystyrene spheres (PS), of a desired size. Generally, PS have a typical diameter ranging from 180 nm to 900 nm. However, the researchers in this study were able to reduce the sphere size, by increasing the polyvinylpyrolidone/styrene weight ratio. The PS were used as models, in order to fabricate hollow silica nanospheres (HSNSs), for thermal insulation applications. With modifications to this silica coating process, HSNSs ...

Author(s): , , ,

Measuring the Thermal Conductivity of Thin Samples of Electrically Insulating Materials

This work introduces a specifically designed sensor to measure the thermal conductivity of thin, insulating materials. This sensor, referred to as the hot square sensor, is unlike the standard sensors, in the sense that it is square in nature, and does not have two, thin layers of Kapton insulation on either side of the thin, metal heating spiral. The lack of Kapton allows a good thermal contact between the sample ...

Author(s):

Heat transfer through glassfiber fabrics coated with silicone resin

In the building and construction industry today, weather resistant and flame resistant materials have become fundamental. As such, silicone coated materials have been intensively researched, as they increase a given materials resistivity to heat and flames. Due to complications and time constraints when testing coating technologies in a lab setting, more enforcement has been placed on numerical methods. Based on stitching patterns, geometry models of the material and heat transfer ...

Author(s): , , ,