The thermal conductivity of a mineral cast material made of epoxy-granite was determined by a steady state method, as well as by the transient plane source (TPS) method. In comparing both methods to geometric models, it was determined that both methods were able to accurately measure the thermal conductivity of the two-phase material. The material that was tested was intended to be used in machine tools, and so its thermal ...
The thermal and rheological properties of n-octadecane, a phase change material, with dispersed TiO2 nanoparticles were investigated at varying temperatures. The properties were investigated in both the solid and liquid phases, with varying mass fractions of TiO2 nanoparticles. The thermal conductivity was found to be enhanced in all of the composite samples when compared to the thermal conductivity of pure n-octadecane, and the maximum enhancement occurred at 3 wt. % TiO2 in ...
The effective thermal conductivity and thermal diffusivity of polymer composites consisting of phenolformaldehyde matrix and oil palm empty fruit bunch (OPEFB) fibers were determined using the transient plane source method. The polymer composites were treated with one of alkali, silanol, or acetic acid to determine the effects of each treatment on the thermo-physical properties of the composites. The effect of temperature on these properties was also evaluated. It was determined ...
Thermophysical properties of a uranium-6 wt. % zirconium alloy were investigated at high temperatures to evaluate the performance of the alloy as a driver fuel for a liquid-metal cooled fast reactor. Of particular interest to the authors were the coefficient of thermal expansion, the specific heat, and the thermal conductivity of the alloy....
The mechanical and thermal properties of blends of cis-polyisoprene (CPI) and trans-polyisoprene (TPI) are investigated and compared to those of the pure elastomers. It was found that the elastic modulus and tensile strength increased with increasing TPI content and that the thermal conductivity, thermal diffusivity, and specific heat of the blends also increased with increasing TPI content. In contrast to this trend, the measured thermal properties of pure TPI were ...
