This article reviewed the use of phase change materials (PCM) as thermal energy storages (TES) as they can be used to substitute large-scale energy demand and assist both economically and environmentally. The thermophysical properties of different phase change materials were studied to assess their viability for thermal storage systems. One of their most common problems with using PCMs is their poor heat transfer rates. This was seen when the transient ...
This article examined the capacity of phase change materials (PCM) to act as phase change thermal energy storages (TES). The review also investigated the thermophysical properties of high temperature PCMs, which can be used as a reference for the design of high temperature phase change TES systems. The transient plane source (TPS) technique was used, among others, to determine the thermal conductivity of the PCMs. It was noted that there ...
This article explored the thermal behavior of epoxy nanocomposites containing different types of nanofillers, such as 1-D Multiwall Carbon Nanotubes (MWCNTs) and 2-D predominant shape of Exfoliated Graphite nanoparticles (EG). The thermal conductivity measurements were conducted using a thermal constants analyzer which is based on the transient plane source (TPS) technique. The measurements indicated that better heat conduction is found in epoxy systems loaded with 2-D predominant shape of Exfoliated ...
This article reported on the synthesis, characterization, life cycle assessment (LCA) of nano insulation materials (NIMs) that are made of hollow silica nanospheres (HSNSs). The transient plane source (TPS) technique was used to determine the thermal properties of the HSNSs. The thermal conductivity of the HSNSs is quite low at 0.02 W/mK because thermal conductivity is predominantly size-dependent at the nanometer scale. The HSNS NIMs were found to be comparable ...
This article studied the properties of two compositions of cermet fuels, U-15wt%UO2 and U-30wt%UO2. The thermal conductivity of the sintered cermets was determined by the transient plane source (TPS) technique using a Thermal Constant Analyzer. It was found that the thermal conductivity increased for both of the cermet compositions with increasing temperature. This was considered to be favorable as higher thermal conductivities ...
