Metal foams are materials composed of a solid grid with air-filled pores, and have applications in combustion chambers of gas turbines. In this study, the thermal properties of porous metal foams were tested to determine their usefulness in heating and cooling systems. The Transient Plane Source (TPS) method was used to measure the thermal conductivity of porous metallic foams. Because the porous foams were not as compacted as the dense ...
Nanofluids are used to improve the thermal conductivity of heat transfer fluids. This study examined the effects on thermal conductivity of zinc oxide (ZnO)/ethylene glycol + water nanofluids as increasing concentrations of ZnO nanopartilces were added to the solution. A Thermal Constants Analyzer (TPS) measured the thermal conductivity of the nanofluids using the Transient Plane Source (TPS) method. As expected, the thermal conductivities of the solutions increased with nanoparticle concentration, ...
The expanding production of polymeric materials is causing plastic waste to become a growing concern. This study aimed to fabricate cement and mortar composites that contained plastic in an attempt to extend the life of non-reusable plastics. The thermal conductivity of the composite material was measured using the transient plane source (TPS) technique. Results showed that as expected, thermal conductivity decreased as the plastic content in cement and mortar composites ...
Ice surfaces dictate energy usage in skating rinks because they are the largest heat exchangers in the building. This study aimed to improve the concrete material used in ice rinks to maximize the performance of their refrigeration systems. The TPS method measured the thermal conductivity and thermal diffusivity of the improved concrete using the Transient Plane Source (TPS) method. Results indicated that adding iron ore to the concrete might improve ...
This study aimed to determine the thermal conductivity of gas-filled Metal Organic Framework (MOF) materials. Glass beads were used as the reference material, and nitrogen (N2) and helium (He) were added to the MOF materials. A TPS instrument measured the thermal conductivity of the MOF samples using the Transient Plane Source (TPS) method. Results showed that the MOF materials containing copper had higher thermal conductivities than iron-filled materials, and the ...
