This work introduces a direct method for measuring the specific heat of solids, using the Transient Plane Source Technique (TPS). To begin, a sample is placed into a thermally conductive holder, surrounded by a thermally insulating material. A thermally conductive sample holder is used, to limit the time it takes to achieve a temperature equilibrium between the holder and the sensor. Insulating the sample holder is to minimize heat loss ...
The Transient Plane Source method was used in this research article to measure the thermal conductivity of an Ionanofluid, highly stable graphene (GE)-based nanofluid, at various temperatures. Researchers took special note of the effects of temperature, GE loading, presence of multi-walled carbon nanotubes (MWCNTs), on the thermal conductivity of the nanofluid. Through experimental testing, it was determined that the nanofluid elicited a higher thermal conductivity, as compared to its ...
Using the Transient Plane Source technique, various geopolymers, metakaolin-derived sodium (Na), sodium-potassium (NaK) and potassium (K), were tested to determine the effect of varying environmental conditions, such as temperature and humidity, on thermal conductivity. The results concluded that the thermal properties of the geopolymers derived from metakaolin are not greatly affected by the Si/Al ratio in the as-cured state. When the sodium geopolymers were tested at 50% relative humidity, the ...
With the use of multiple thermal instruments, the thermal conductivity (lambda) of fibrous insulations was measured in the plane direction. In this study, a method was put forth the estimate thermal conductivity. This method assumed that the thermal conductivity of the anisotropic material was equivalent to that of an isotropic material with identical bulk density and specific heat. This novel method displays the thermal conductivity of the anisotropic material as √(...
This article delves into the depths of the transient plane source (TPS) method for measuring thermal conductivity. When dealing with insulative materials, thermal conductivity is one of the most important thermal properties, as it directly reflects the R-value – amount of heat-transfer resistance the insulation provides. This quick and accurate method was employed in this study to measure the thermal conductivity of insulation materials at room temperature, as well as other ...
