Autoclaved aerated concrete was studied because it has potential to be used in the design of energy-efficient buildings. Three different samples were tested, each with a unique density. Of particular interest to this work was the thermal conductivity of the samples, as this material would be used as a thermally insulating concrete. The thermal conductivities were measured at various percentages of moisture content, and it was found that increasing moisture ...
Biobased foams derived from lignins and tanins were produced by mechanical frothing and curing. The obtained foams did not crack after drying. The foams were found to be good thermal insulators with thermal conductivities ranging from 0.035 to 0.055 Wm-1K-1....
Thermophysical and structural properties of sintered ore particles (SOPs) were determined to expand upon the little documented information there is regarding the properties of these materials. In addition to this, a fractal model was also developed for the prediction of thermal conductivity in SOPs as a function of porosity. The experimental results revealed that the specific heat capacity increased with increasing temperature and that the thermal conductivity decreased with increasing ...
