Chemically modified graphene (CMG) was obtained by combining aminopropyllsobutyl polyhedral oligomeric silsesquioxane (NH2-POSS) and hydrazine monohydrate to functionalize graphene oxide (GO). CMG and polyimide (PI) were combined to create the CMG/PI nanocomposite. The properties of this nanocomposite were obtained using a variety of methods. The thermal conductivity measurements were performed using a TPS instrument by utilizing the transient plane source (TPS) method. It was found that the thermal ...
This article explored the various characteristics of nanostructured pyrochlore La2Zr2O7 fibers. The thermal properties were measured using the transient plane source (TPS) method on a thermal anlyzer instrument at room temperature. It was found that the samples exhibited low thermal conductivities. It was observed that the thermal conductivity of the samples decreased with increasing silica content in the fiber. However, low thermal ...
As nanotechnology becomes increasingly important, researchers are investigating methods to decrease the size of electronics. Carbon nanotubes (CNTs) have potential applications in nanoelectronics because of their high thermal conductivity and miniscule size. This study had many focuses, but a TPS used the transient plane source method to specifically measure the thermal conductivities of CNT-fabricated thermal pastes. Results showed that the thermal conductivities varied depending on filler content, but were comparable ...
