Join us at the International Thermal Conductivity Conference (ITCC) and the International Thermal Expansion Symposium (ITES).

Thermal Conductivity Paper Database

Search academic papers below:

Recommended Papers for: ceramics

Total Papers Found: 35

Thermally conductive composite films of hexagonal boron nitride and polyimide with affinity-enhanced interfaces

The focus of this research was to discover new thermally conductive ceramic/plastic composites for their use in thermal management. In this experiment, the thermal constants analyzer was used to measure the thermal conductivity of composite films containing hexagonal boron nitride particles and polyimide. Upon testing, a thermal conductivity of 7 W/mK with a 60% filler content was noted, as compared to a thermal conductivity of 5 W/mK for the plastic ...

Author(s): , , , , , , ,

Optimization and Analysis of Thermoelectric Properties of Unfilled Co1–x–yNixFeySb3 Synthesized via a Rapid Hydrothermal Procedure

A new application for the transient hot-wire technique for thermal conductivity measurements has been described. It is intended to provide an accurate means of implementation of the method to the determination of the thermal conductivity of solids exemplified by a standard reference ceramic material. Measurements of the transient temperature allows an absolute determination of the thermal conductivity of the solid. The uncertainty achieved for the thermal conductivity is better than ±1%, ...

Author(s): , , , , ,

Porous materials as open volumetric solar receivers: Experimental determination of thermophysical and heat transfer properties

Previously, the thermal conductivity of extruded monoliths, ceramic foams and metal structures were determined for their application as open volumetric receivers in concentrated solar radiation. Volumetric receivers contain a porous material, which is ultimately heated through solar radiation. The pores allow ambient air flow through the material, which will eventually reach a temperature of 700˚C. This heat is then used to feed the steam turbine process. Understanding the effect of ...

Author(s): , , , ,

Heat capacity, thermal conductivity, and thermal expansion of barium titanate-based ceramics

Barium titanate-based ceramics are most commonly found in electronics as dielectric layers in multilayer ceramic capacitors. Two different forms of Barium titanate-based ceramics were analyzed in this article to determine heat capacities as a function of temperature. The thermal conductivities and thermal diffusivities of these two forms were also determined using the Hot Disk Transient Plane Source method. Inferences towards the performance and reliability of barium titanate-based ceramics under various ...

Author(s):

Transient plane source techniques for thermal conductivity and thermal diffusivity measurements of solid materials

This article outlines the general theory behind the Transient Plane Source (TPS) Technique.To test these arrangements, scientists tested two materials, Cecorite 130P and Corning 9606 Pyroceram....

Author(s):