Join us at the International Thermal Conductivity Conference (ITCC) and the International Thermal Expansion Symposium (ITES).
Nanofluids are heat transfer fluids with enhanced thermal conductivity properties due to the addition of metallic-based nanoparticles. In this study, the thermal properties of Al¬2O3 and TiO2 nanofluids were examined to evaluate their usefulness in microchannel heat sink applications. A thermal constants analyzer measured the thermal conductivity of the nanofluids using the transient plane source (TPS) method. Results showed that thermal conductivity increased with volume fraction of nanofluids, and ...
Nanofluids are used to improve the thermal conductivity of heat transfer fluids. This study examined the effects on thermal conductivity of zinc oxide (ZnO)/ethylene glycol + water nanofluids as increasing concentrations of ZnO nanopartilces were added to the solution. A Thermal Constants Analyzer (TPS) measured the thermal conductivity of the nanofluids using the Transient Plane Source (TPS) method. As expected, the thermal conductivities of the solutions increased with nanoparticle concentration, ...
Nanofluids are used in heat sink applications to improve the rate of heat dissipation and reduce temperature gradients in electronics. This study specifically examined the thermal properties of Al2O3-H2O nanofluids used in micro heat sinks. An instrument measured the thermal conductivity of the Al2O3-H2O nanofluids using the transient plane source (TPS) method. Results showed that, as expected, thermal conductivity increased with the concentration of ...
Thermally conductive nanoparticles are often added to conventional fluids to improve thermal properties. In this paper, the effect of small concentrations of multiwalled carbon nanotubes (MWCNTs) on thermal conductivity over a range of temperatures was tested. A Thermal Constant Analyser measured the thermal conductivity of the nanofluids with the transient plane source (TPS) method from 10 to 80 °C. Results showed that thermal conductivity of the nanofluids increased with temperature, and with ...
Water is being used to absorb incident light for use in solar power applications. Adding nanoparticles to water improves the solar collection efficiency. In this paper, a Thermal Analyzer measured the thermal conductivity of the nanofluids using the transient plane source (TPS) method. Results showed that the thermal conductivity of the nanofluids increased with temperature and nanoparticle concentration....