Epoxy nanocomposites containing thermally reduced graphene oxides (TRGs) with different oxygen contents were prepared and their mechanical and thermal properties were investigated. It was found that increasing the number of oxygen containing groups on the TRGs resulted in reduced agglomeration of the graphene oxides within the epoxy matrix. Therefore, in samples with a higher oxygen content, a higher interfacial contact area is present between the organic and inorganic phases in ...
Pristine and modified exfoliated graphite nanoplatelets (xGnPs and M-xGnPs, respectively) were dispersed into a paraffin wax phase change material (PCM) in an effort to raise the thermal conductivity of the PCM. The addition of pure xGnPs would decrease the electrical resistivity of the composite PCM, and thus its potential for use in electrical devices would be limited due to safety concerns. To eliminate this issue, the M-xGnPs were prepared. Samples ...
A disc of a composite ceramic material composed of silicon nitride (Si3N4) and 20% hBN was prepared and its tribological characteristics were investigated by sliding a Si3N4 pin across its surface at different sliding speeds. The friction coefficient and wear coefficient were determined for the composite using two different test modes: one in which the pin was kept stationary and the disc was rotated on top of the pin, ...