This article summarizes the history of the development and improvements to the transient hot-wire technique. Starting with the discussions on “gas conduction”, and concluding with some modern applications, it covers the interactions of each component of the apparatus, including the cells, bridges, software employed and the theory development. The authors concludes the paper by outlining some issues with the current techniques and describes their recommendations for future advancements....
Seven distinct samples of nanofluids consisting of different concentrations of spherical graphitized carbon black in an ethylene glycol solution were analyzed to determine their thermal and rheological behavior. The thermal conductivity measurements were made at 20°C and 30°C with a transient hot wire instrument made by Thermtest called THW-L2 and specifically designed to measure the thermal conductivity of liquids. This study was ...
The authors have presented a literature review on computational and experimental studies on the thermal conductivity of nanostructure enhanced phase change materials (nePCMs). It was found that a wide range of nanostructures have been investigated, from carbon nanostructures and carbon nanotubes to metal and metal oxide nanoparticles. The carbon nanostructures and nanotubes were found to generally enhance the thermal conductivity of the PCMs by a greater amount than metal or ...
The authors have developed a model for the estimation of how a nanofluid will work as a coolant without having to perform a number of experiments. The nanofluids used in the study were four water based metallic oxides. These nanofluids were compared to water in terms of thermal conductivity to determine if they would be a good coolant. The model that was developed involved the calculation of the highest wall ...
Through the use of wood shavings as a filler for sand concretes, the authors have been able to improve the thermal properties of the prepared concrete as well as reuse a waste product. The previously used concrete had a higher thermal conductivity and higher density, and through the addition of wood shavings to the concrete mixture, the density and thermal conductivity of the composites have been lowered. The transient plane ...
