The thermal conductivity and thermal diffusivity of SRP (sisal-reinforced polyethylene), GRP (glass-reinforced polyethylene), and GSRP (sisal/glass hybrid fibre-reinforced polyethylene) were tested from 120 to 350K. Results showed variances in thermal conductivity values with varying temperatures in materials containing different orientations of sisal fibres. Due to the anisotropic nature of the SRP fibre, there is a difference in the thermal conductivity readings from the parallel to the perpendicular direction. The GRP ...
When thermal conductivity and diffusivity are measured with a thermal constants analyzer, sensors of different designs are being used. Sensors are primarily made of nickel foil, arranged in a double spiral, sandwiched between two thin sheets of insulating material. For experiments between 30 and 450 K, the polyimide Kapton has been used as the insulating material. For experiments being performed at temperatures above 450 K, but below 1000 K, Mica can be used as ...
This article delves into the depths of the transient plane source (TPS) method for measuring thermal conductivity. When dealing with insulative materials, thermal conductivity is one of the most important thermal properties, as it directly reflects the R-value – amount of heat-transfer resistance the insulation provides. This quick and accurate method was employed in this study to measure the thermal conductivity of insulation materials at room temperature, as well as other ...
This study aimed to improve the heat transfer capabilities of water-based nanofluids, by varying the concentration of sodium dodecylbenzene sulfonate (SDBS), a chemical surfactant, as well as by altering the pH. It is said that the thermal conductivity and stability of nanofluids are directly related and are also greatly influenced by pH and chemical surfactant concentration. The water-based nanofluids displayed higher thermal conductivity values as the pH and SDBS concentration ...
In this article, researchers set out to determine the thermal characteristics of boron nitride reinforced high-density polyethylene composites. Various filler contents were studied through thermal characterization and it was determined that the composites containing 30% filler elicited the best thermal insulation and mechanical properties. The results displayed that the lower the filler content, the higher the thermal conductivity of the reinforced composite. Researchers also concluded that the smaller the boron nitride ...
