Iron cores are important units of electromagnetic devices but lack the ability to be shaped into three-dimensional objects. Soft magnetic moldable composites (SM2C) are new materials that can possibly substitute iron cores because of their malleability. The aim of this study was to explore the physical and chemical properties of SM2Cs to determine their range of applications. The thermal conductivity of SM2Cs was measured using the transient ...
This paper presents the idea of flavonoid foams that are manufactured from natural resources rather than formaldehyde-containing tannin-based foams. A TPS instrument measured the thermal conductivity of the foams using the transient plane source (TPS) technique. Results show that the flavonoid foams are a better choice than tannin-based foams because they have a lower thermal conductivity which makes them more insulative and fire resistant, and they do not release toxic ...
Polyflavenoid tannin-furanic rigid foams have widespread industrial applications. The chemical and physical properties of the five main tannin-based foams are tested and compared in this paper. A TPS instrument measured the thermal conductivity of the tannin-based foams using the transient plane source (TPS) method. Results showed that the tannin foam containing formaldehyde and a low-boiling blowing agent (STD) had the highest thermal conductivity, and the foams without formaldehyde and surfactant (...
Adding conductive fillers to polymer resins improves the thermal conductivity of the polymers. In this study, Thermocarb TC-300 synthetic graphite and Fortafil 243 carbon fiber were added to Vectra A950RX liquid crystal polymer (LCP) to produce anisotropic single and multiple filler composites. A Thermal Constants Analyzer measured the thermal conductivity of the composites using the transient plane source (TPS) technique. The formulations that contained Thermocarb fillers had higher in- and ...
Paraffin is an excellent phase change material (PCM) for latent heat storage, but it does not efficiently use stored energy because of its low thermal conductivity. In this study, nickel and copper foams were added to paraffin to enhance heat transfer. A Thermal Constants Analyzer measured the thermal conductivity of the paraffin composites using the transient plane source (TPS) method. The addition of copper foam enhanced the thermal conductivity of ...
