This paper examined the thermophysical properties of hydrate using disodium hydrogenphosphate 12H2O to develop a long-term latent heat storage (LTLHS) using supercooling. The thermal conductivities of solid and liquid disodium hydrogenphosphate 12H2O were measured using the transient plane source (TPS) technique. Results showed that the thermal conductivity of liquid disodium hydrogenphosphate 12H2O increased slightly with temperature, whereas the solid phase showed a minor downward trend. Also, thermal ...
In this study, pure eicosane and eicosane-CuO solid composites were prepared using ambient and ice-water bath solidification methods. A Thermal Constants Analyzer measured the thermal conductivity of the samples using the transient plane source (TPS) technique. Results showed that for both solidification methods, composite thermal conductivity was independent of temperature up to a point, and the composites with the highest nanoparticle concentrations had the highest thermal conductivity. Although the composites ...
The structural integrity of steel members is jeopardized when fire insulation is partially lost. This paper examined the thermal and mechanical properties of fire insulation under elevated temperatures to further understand thermal gradients and develop preventative safety measures. A thermal analyzer measured the thermal conductivity of the insulation material using the transient plane source (TPS) method. Results show that thermal conductivity increases with temperature because the spray-applied fire resistance materials ...
Polylactide (PLA) is a biodegradable polyester with a wide range of applications in transportation and construction industries. In this study, the physical and mechanical properties of low void fraction PLA foams and high void fraction PLA composite foams were examined after their fabrication using the high-pressure foam injection molding (HPFIM) process. A thermal constants analyzer measured the thermal conductivity of the samples using the transient plane source (TPS) method. Results ...
Despite its fragility, poor thermal properties, and high water sorption rates, polymethyl methacrylate (PMMA) is commonly used in denture fabrication. This study aimed to examine how the addition of Aluminum oxide nanoparticles affected the properties of PMMA. A thermal constant analyzer measured the thermal properties of the Al2O3 nanoparticles using the transient plane source (TPS) method. Results showed that the thermal conductivity and thermal diffusivity of acrylic resin improved ...
