Microencapsulated phase change materials (MPCMs) are excellent materials for the storage of thermal energy, and through their dispersal into a carrier fluid, microencapsulated phase change slurries (MPCS) can be prepared. These slurries exhibit both excellent thermal energy storage and heat transfer properties. A series of MPCS were prepared for this research and subsequently tested for thermal conductivity and specific heat. Other methods of quantification include DSC, TGA, rheometry, and infrared ...
The main objective of this research project was to create a material with a very low thermal conductivity at high temperatures, for the conservation of energy in high temperature systems. To accomplish this goal, the researchers incorporated carbon nanofibers into the mesoporous network of monolithic aerogels, with up to a 20 wt.% through an accelerated-gelation sol-gel process. The synthesis process also involved the use of supercritical drying of the aerogels to ...
The analysis of a pultruded E-glass reinforced polyester (GFRP) composite is performed by TGA, DSC and DMA methods. The data obtained from these analysis methods agreed well with theoretical models applied to the GFRP. The specific heat capacity of the composite was found to decrease over heating and the decomposition process....
A series of melamine-formaldehyde microcapsules were synthesized using an in-situ polymerization and subsequently characterized for their thermal and structural properties. SEM and FT-IR were used to investigate the structural properties and DSC and TGA were used to investigate the thermal properties. The authors concluded that the thermo-physical properties of the microcapsules were related to the synthesis conditions and the core content of the capsules....
The objective of this study was to create polymer composites with high thermal conductivity and mechanical properties. To acquire these, aluminum nitride microparticles were modified with a titanate coupling reagent of isopropyltrioleictitanate, and blended via a power-mixing method into linear low-density polyethylene. Using a thermal constants analyzer, the thermal conductivity of the composite was measured. The results concluded that the addition of aluminum nitride particles to the composite enhanced the ...
