Join us at the International Thermal Conductivity Conference (ITCC) and the International Thermal Expansion Symposium (ITES).
The authors present a method of preparation of TiO2 nanotubes by alkaline treatment (with NaOH) of TiO2 particles followed by acid-washing and annealing treatment. Theoretical and experimental studies on the thermal conductivity of TiO2 nanotubes is also presented. The thermal conductivity values determined experimentally matched well with theoretical values obtained. It was found that TiO2 nanotubes had a lower thermal conductivity than the original TiO2 particles. This phenomenon was attributed ...
A series of compacted Bi0.5Sb1.5Te3 nanoplatelets are synthesized using hydrothermal methods, followed by cold pressing and sintering at temperatures between 300°C and 380°C. A variety of thermal, mechanical and electrical analyses are then performed on the synthesized nanoplatelets including: TPS technique for thermal conductivity, SEM/TEM/AFM to elucidate the mechanical and physical properties of the nanoplatelets, and the Oxford closed cycle cooler cryostat for measurement of electrical ...
Measurements were carried out to determine the electrical resistivity, thermal conductivity and Seebeck coefficients of a series of Fe-doped misfit-layered oxides (Ca3Co(4-x)Fe(x)O(9+delta) (x=0, 0.05, 0.1, and 0.2)). The thermal conductivity experiments were carried out using a Thermal Constants Analyzer via the TPS technique. XRD was also used to characterize the Fe-doped oxides. Overall, the transport properties of the Fe-doped oxides were studied and it was found that ...
