This study investigates the properties of a material to be used as an energy storage medium that can use energy stored from the summer months, and then release it during the winter. The proposed material uses a graphite foam, with ZnO coatings with a flower like morphology, to house a sugar alcohol phase change material (PCM). The thermal conductivity of the material was measured using a transient plane source (TPS) ...
This study is to determine the thermal properties of a paraffin/red brick composite to determine its viability as a form-stable phase change material. Extended graphite was also added to the composite to improve its thermal conductivity. The thermal conductivity for this material was measured using a transient plane source (TPS) method. By adding the paraffin, the thermal conductivity of the composite increase, also by adding extended graphite the thermal ...
Synthetic polymers in starch-based polymer formulations improve the thermal and mechanical properties of the compounds. The purpose of this study was to develop and analyze foams containing ethylene-vinyl acetate (EVA) and varying concentrations of corn starch. A Thermal Constants Analyser measured the thermal conductivity of the EVA/starch samples using the transient plane source (TPS) method. Results showed that the thermal conductivity of the blends increased with starch content. The ...
Polylactide (PLA) is a biodegradable polyester with a wide range of applications in transportation and construction industries. In this study, the physical and mechanical properties of low void fraction PLA foams and high void fraction PLA composite foams were examined after their fabrication using the high-pressure foam injection molding (HPFIM) process. A thermal constants analyzer measured the thermal conductivity of the samples using the transient plane source (TPS) method. Results ...
Understanding the pyrolysis model for medium density fibreboard (MDF) is important for infrastructure fire safety. The purpose of this study was to determine the thermophysical properties of charred and uncharred MDF. The thermal conductivity of these inhomogeneous fibreboards was measured using a Thermal Constants Analyser in conjunction with the transient plane source (TPS) technique. Results showed that the experimental results were in good agreement with literature values, and specifically, the ...